Yes please if still available. Will be for delivery (Hertfordshire) thanks

I’m in Hertfordshire and debating it after the garage said it’s essentially a write off due to everything that’s wrong with it. Boooo so it’s break it or we buy any car…

Ha, I’ve looked at it as an investment… Total was £8.5k all in, that’s very many parts and all labour. I had budgeted for £6k but more stuff surfaced that needed replacing during the process. Obviously. Plus I updated a few bits too and added some toys

Yep, had new suspension, brakes, exhaust, steering box…. Etc etc

Yep, that's what I thought - he's done a good job for sure. It was a fair old list of stuff he had to do, most definitely not a simple straightforward chassis swap. 2.5k over budget :( But still, I'm very happy indeed

I'll ask the wife... To be fair, the amount of crap I get off my mates about my 'kit car built with bits off eBay', the Duracells were quite a nice touch :)

On a forum a few months back I asked the age-old question... do I get the chassis replaced or sell as a going concern? The overwhelming response was get it replaced, or you’ll just end up regretting it! Somebody recommended Si Sagar at SS 4x4 Performance so we had a chat on the phone the...

SSTC Thanks for the interest

Hi all. I bought this Sankey narrow track trailer a couple of years back. However, despite best intentions (and pesky family life), it's pretty much sat where I dropped it off. So - I regret it's back up for sale. Hopefully the next owner will get a little further than me. It's a 1967 Narrow...

Thanks all, will see if I can stick my head under while it's still light later on. Will leaks in these places be obvious? ta

Hi all, Over the last week, the brakes on the 90 have been getting a little spongy. On first depress of brake pedal, it goes nearly to the ground, then every pump after gets stiffer. They stay ok for a little bit, a few hundred yards and then back to pumping the pedal. I've not had chance to...

All gone apart from the big lens. £220 delivered Nikon Lens - AF-S Nikkor 70-300mm VR 1:4.5-5.6G ED (https://store.nikon.co.uk/af-s-vr-zoom-nikkor-70-300mm-f-4.5-5.6g-/JAA795DA/details)

Hardly used and in great condition. Will get total actuations off once the battery has charged. I bought it all new a few years ago but it just sits in the cupboard not getting used. Literally stumbled across it getting the Christmas decs out. Nikon D300s Body...

With the one I have (pictured), the threads are attached to the plate. So you just remove existing plastic cover, pop this into the existing holes and washer/bolt it from inside the wing. It can’t be undone from outside

https://www.landroverdefendersecurity.com/products/optimill-swivel-lock-for-quick-release-steering-boss

I’ve seen that one too. Orange with a keyhole on the top?!?

Every little helps :) We all talk about a layered approach... Can’t get to mine from underneath unless you take a bit of the underbody protection off. Also can’t easily get to it through the front grill as I have a sodding great lightbar welded in the way :)

I bought the below wingtop cable guard ‘plates’ from Will at https://www.landroverdefendersecurity.com What a hefty bit of kit - it must be about 5mm thick. It looks good and so easy to fit. Secured that pesky little hole in about 8 minutes, nice and easy. The plate bolts from underneath so you...

Thank you @raywin I definitely do not have that, so will check the cable is there and give the switch an eBay search :) Ta muchly. (now if there is a cable in there, i'm thinking I might run additional switches to the rear of the headlights...)

Hi all, 2001 Defender TD5. Bonnet alarm switch. Where should the switch go and should there be a loom/wire to pick up somewhere in the engine bay (purple with blue trace)? Cheers in advance