Both pump and filter are located in the rear wheel arch, I believe this to be the situation from sometime in 2002. Mine is a 2002 model. Cannot find any low pressure pump in the engine bay!!!!! Good eh! Chris.

I have received the pump I ordered, WFX500070, with the four wires - mine is a two wire system, so the part in the tank does not actually contain a pump, just a gauge and fuel pick up system. So therefore it must only have the one pump, the one in the rear wheel arch which appears to be...

I am being really thick here - bought a new in tank pump, part no WFX500070. On the electrical connector on the top there are four wires, makes sence, two for the pump supply, two for gauging. Now on the pump in the gaylander (using correct terminology now) the top multipin connector only has...

Thanks - tried that - no fuel flow, so ordered new tank pump. Having to drive slitty suzuki thing at mo, I know another two swear words. It is bloody 'orrible...... but transport. Chris.

So that reply means that is definitely the fookin fuel pump - but which one!!!!! I need to fix this - hairdressing appointments to keep................

OK - suitably told off for my use of the T word. Fuel filter was very restricted so have changed that and my little "T" now starts but will not rev above 3500 rpm. Can now hear wheel arch pump run, still a bit intermittently, and fuel is flowing. Now think it must be the main in tank pump... Chris.

IT IS MY LITTLE TRUCK AND I LIKE IT......... So there!

Thanks for the advice guys - since been out to the truck and can now hear the wheel arch pump run intermittently and the truck will now start!!!!! So kind of rules out electrical supply problems to me, so knackered pump or blocked filter? Chris.

If I may ask some advice from the far more knowledgeable on here? The little truck (2002 TD4) was running fine and then spluttered to a halt, anyway after a bit of messing, there is no buzzing of the fuel pump on turning key, so obviously that is the snag. I am assuming the wheel arch pump is...

Yeap, done it, bit of a bitch but didn't follow procedure in RAVE cd. Seem to remember engine mounts didn't come out, but did release engine from mount(one side only)! I did mine from underneath - seem to remember jacking engine up to get at one bolt, the lowering engine to get an next bolt...

I possibly had a similar problem, parked up, got back to car and the starter was dead! All other electrics seemed to work, not even a click when the key turned to start! Towed home, left it for a day or two until I had time to play and the bloody thing started first time! Got a bit of advice...

Just noticed the spelling mistakes in the last post, it should read "bitch to find and changing it" I blame the whisky!!!!!

Mine is a 2002 model and the inline fuel filter lives in the RH rear wheel arch. It proved a bit of a bitch to fine and chancing it the first time was "interesting". Have fun! Chris.

Well thanks for your advice gentlemen. Read up as much as I could about the start and immobilization system off the RAVE cd last night, armed with this knowledge, your advice, a multimeter and a big stick hidden behind my back just in case - I gentle turned the key listening for starter relays...

Exactly the same problem has happened to me! My normally very reliable Td4, just doesn't want to know. Turn key and it is dead! All other electrics look good! Recovery man suggested disconnecting the battery for half an hour or so - is this worth a try? Any pointers would be very gratefully...

So I have lurked on here for a while now and so far always got good info from reading the ramblings of others! Now cannot find any info on changing the water pump on my TD4. So couple of questions if anyone has done this job and can guide me in any way. Have read the Rave description of doing...