Agree, this is why I have asked, because as I remember few years ago someone has found this solution but I can not find the post :-(

do you know the P/N or gearbox type or model year?

Hi All I had problem with my reverse light switch a few years ago due to selector yoke wear out. That time I modified the original switch by removing the original pin (which reaches the yoke when selecting reverse) and changed to a longer one made by a turner. At that time someone mentioned that...

I have also removed mine when I cleaned and protected the chassis. If it is empty not a big deal to remove it, I also used gearbox trolley to slowly let it down to the floor (but when it is fully empty it is not heavy . I remember also that the release of hoses on filler side made me some...

I was also thinking in the past to upgrade this way, but do not I need to do other modifications like new mapping, intercooler? I already have stage 1 remap, but for standard turbo. Regarding on price, in Hungary a standard cartridge (Torborail, Zip or Melett) cost about 230€.

Hi all! Today i serviced my car (oil change) and also checked turbo. There is some play in radial direction (I know it is normal) but nothing in axial (no move in and out). If i try to spin it, moves only one or half turns (does not spin freely). Also as you can see the hose connecting to the...

Hi All This my first post here even I member of Landyzone for long time as being Discovery 2 owner for almost 10 years. I plan to buy a Classic 3.5 MY1986. It is located in Hungary and has OT certificate (Old Timer which normally requires quite good condition and not easy to get). I got several...

Done the mod today. No amigos after about an hour drive on different roads🙂 The job was quite easy to do. Thanks for the help!

I have found exactly the same kit (same supplier), so if it works well for you I will try as well.

Hi All just a quick question. I need to replace light bulbs in both aircon unit and clock. I have found led bulb set for about 18€. Are those reliable or better to use original ones? Thanks

Thanks for your comments! I guess no meaning to modify the existing SVS, better to start with a brand new, right?

Thanks, what about using this modified SVS sold on ebay? New switch set which already prewired. Plug and play... Any experience with this?

Also called "option B" modification of the wiring of the ABS shuttle valve switch

was it difficult to get the bolts out? Have you removed the whole ABS block or just lifted as much as the hoses allows?

I replaced mine following the above linked instruction. Worked well:-) Be prepared with "special" tools or strong help.

Hi all I know it has discussed many times, and probably the answer is already given, but just before I start removing SVS and start wiring mod, is there any other thing I should check before? The error code read by Nanocom and it is "23-05 shuttle valve switch electrical fail (intermittent...

Mine was done by Storm tuning 2 years ago. I have downloaded my map using my nanocom sent it, get the modified back within a day, uploaded and job done. Very satisfied with the result as well.

I also had such mechanical problem with the key a year ago. I used wd40 for cleaning and lubrication and it worked. At least for a while....

No, there is no clunk. Yes correct I can open by handle. I will remove the panel just to better see and hear before ordering a new actuator.

Hi All Seems that my front left door (driver side) lock broken as it can not be closed neither with remote nor by key itself. All other doors are working correctly only the driver side doesn't. I had issues in the past few times when this door did not open by remote and could open only from...