Ok. That's sounds like a plan. I will check tomoz. Thanks for the advise and reply

Hi. If I understand you correctly the the answer is yes. With the 10mm bolts lose I can move the FIP anti-clockwise but not clockwise. It's as though I might be one tooth out on the FIP

Hi all, been a while since I posted as been really busy with work etc... but now have some time to play with Leaky (as the kids call him ) I have searched this exact query but nothing matches exactly I changed by timing belt 6 months ago and all has seemed ok.......... Recently decided to change...

Hi... just done this myself and just ordered a Hawk kit as well :) I have rebuilt my 110 and put on new front doors (new type) but was put off with the cost of the locks..so I went and fitted my old handles (push button) with the old locks.. After a few weeks I realised that they had no security...

Help Please Can someone please tell me where the wiring from my reverse light switch plugs into? i.e. not from the gearbox side but the bulkhead side....does it go under the bulkhead and plug into a plug near the fuel filter? Am at the stage of my rebuild where I am plugging the wiring loom...

Hi...its a 93 200TDI 110. Yes to sensor in resv, however I may put it on and wire it up to so it works as you describe...thanks for the reply

Hi folks, Quick clarification please I noticed my donor 300tdi Bulkhead has a PDWA valve fitted to it. My 200TDI didn't have this. I have upgraded my brakes over the last 24 months (rear Salisbury to Disc from Drum, and front axle is a 300tdi etc) 1. Do I need it as a safety...

Thanks MRTs300 just need a crane then :)

Question please? Whilst I have good access to my gearbox/transfer box and engine, I would think it is wise to check my clutch???????????????? please see picky below.....Can I just slide back the whole transmission from the engine and check or do I need to 1st remove the transfer and then the...

So, been a few weeks since I posted! Been busy with work but will post some piccies. Most of the weekends have been about cleaning the chassis and painting with POR15 etc. I chipped off all the surface rust and used an angle grinder to get back to clean steel. Chassis really good :) except for...

Aaron, noticed you use a lot of Allen Bolts Where do you buy them from and any particular reason you use Allen over standard Bolts mate? Thanks

Good to meet you the other day Aaron. Landy looks great close up and in 'real life' will be following this thread now as a tuition for my project !

thanks

Guys, Just seen this whilst browsing rebuild threads Any Pros or Cons? Obviously not good for wading, but mine only sees puddles anyway Is it advantageous for cleaner air input to the turbo?

Those are great pics and I will refer to them when putting mine back together :D

lol Thanks Station. Swapped a few emails with Clive and we decided that I didn't need the bespoke XM that he makes. Next up was MIB and after a long conversation I have ordered one from them...expecting it in a weeks time. In the meantime I am practising welding again ! :)

Thanks Lofty good luck back at ya! :D

Photos below Knackered C pillars Fooked X member Old Self leveller that doesn't work! Also cannot Budge those bolts from the A frame ball joint bracket can I remove this bracket and the whole damn BOGE?

Hello all, Not been posting, but still been lurking for the last 9 months. Thought it was about time to sort Leaky my Landy out!:rolleyes: Decided last Friday to strip him down and change the Bulkhead! Have been meaning to do it for a while. I have a TDCI and a 300TDI bulkhead to choose from...

Good call...I will check this 1st !