Hi It hasn't shown any faults, that's what I've mentioned in my last two threads.

Hi The fault is that the Rover is sitting on the bottom, all four lights on dashboard and message saying 35mph Max , and the Off Road Symbol on. this has been a weekly problem, but for some reason I cant reset the suspension with my lead now even though I'm getting good idle, when it was working...

Hi Been having weekly problems with my suspension, I have been removing the fault with my lead, but I only have to go over a bump or sharp corner then all four lights come back on and 35mph warning. Now I cant reset suspension even though I'm getting good idle, the other confusing thing is that...

Hi I have a 1997 P38 Range Rover, I've been constantly having problems with my suspension, for no reason my suspension just goes bonkers. The last all four lights came on and the symbol for off road setting, plus MAX 35MPH. I have the lead to remove the fault, but I'm having problems getting a...

Hi I need to replace my 1997 P38 4.0 se engine/ Auto (Emission Problem) I've got an option of buying a Classis Soft Dash Range Rover with a 300TDi engine / Manual. If I change the engine/ gearbox, how do I sort the other stuff ECU's engine, gearbox, how would it effect the Becm and other stuff...

Hi Used car all day Saturday and was fine, started ok Sunday morning and was ok until wanted to use it Sunday afternoon, just nothing, dashboard lights up, I then just turned the ignition key slowly 2 or 3 times and she started. this going to be a nightmare, especially if your thinking my BECM...

Hi I used the car yesterday and it was fine, the gear positions are showing on the dashboard. Something that I did do while having this problem was to charge my battery, in a earlier thread (reply) I did say that I tried my car one morning when I got home from work and it started....any...

Hi Ok! I will check this when I get home from work. Cheers!

Hi Well once I thought I had found the problem, I thought asking about the xyz switch, I would get replies from members who had experiences of the same starting troubles. Sorry if have broken any forum rules!

Hi Ok, I will have another look in the manual. Thanks

Hi Thanks, I have a copy of RAVE, but haven't seen a trouble shooting section attached to gearbox section, which section of the manual would I find this list. I've been looking in Auto gearbox to solve my problems.

Hi I have, that's why I thought it must be the xyz switch with the multi-plug, wouldn't this tell the gearbox ecu that its in Park (P) and allow it to start.

Hi Is there a separate switch or signal when the gearbox is in park (P) telling the car it can start, or is it just this xyz switch.

Hi Are you thinking it maybe a loose cable on my starter motor.

Hi My car doesn't start, and it the symptoms is as if I'm still in gear, I have move my gear stick about, and its sometimes worked, other times when the car is just left its decided to work, see my other thread. Any ideas....cheers!

One more thing! came one morning after my nightshift, I thought I'll just try my car see if its starts, sure enough it started.

Hi I will have another look in RAVE regarding any other switches, a signal must be sent to an ECU when the gearbox is in P, so I just assumed this XYZ switch did this.

Hi Looked in Rave 'Auto Gearbox' there's a Gear Selector switch with a cable/multi-plug attached to it, you need a (setting up block) when re-positioning the replacement, anybody done this before, could this be my problem? any info on the block I could make one at work!

Hi Would you know where this located?

Hi Yes! been trying that, and that's what worked last time.