Hi I have downloaded some instruction to check compressor tomorrow. The compressor did run in the Functions setting with my RSW lead tho, would I be by-passing the thermal switch with this function?

Hi I had another go at solving my EAS problems with my RSW lead, this time I didn't have comm's problems. Everything seems ok faults showed ....FR signal......cleared fault. Tried my car but no suspension rise.....and compressor not running So plugged lead again and went into Functions which...

Hi Yes using USB laptop and have tried using different comm's (is this the same as changing port settings) Regarding (MUST loading driver for USB adaptor) not sure what that means Have loaded software when I very first used it years ago.

Hi I have had this problem a while now......my suspension has been inflated manually with my compressor with valves attached. Today after sorting running problems thanks to other members (Thank You) I tried to sort the EAS I have a lead from RSW solution but struggling getting it to idle...

Hi I carried out a compression test most around 140 one higher and one lower, felt it should good enough to run. so put some new spark plugs in, connected everything up and it at least started but lumpy. so I had a few spares from other Rovers so I swapped my MAF a simple swap, tried it and runs...

Yes.....new bolts was used?

Hi Before it stop altogether, I had to really pump my pedal to get the engine to start, and keep revving it otherwise to drop straight away and stalled, tried adjusting tick over just to get it to run, but it did seemed lumpy when running. The odd cough, plugs wet, plugs black , lots of black...

Hi I have a 1997 P38 Range Rover 4.0se. I replaced head-gaskets maybe six months ago, the engine started ok and carried on doing so. Then after a while it started to miss fire. and just got worst until now it wont start it only turning over now. I have a spark at the top of the plugs on all...

Hi I have always had the 'Check Engine' showing on the binnacle, I turn my ignition on and only get clicking from the relays in the fuse box. I have checked the following Fuse box connections (top and underneath) Cleaned Earths Checked fuses in Becm Have looked at the starter motor cable looks...

Hi Wanting to do a re-sync.....ECU from BECM , just wont complete in valid time, must be doing something wrong. step by step guide would helpful, just to confirm instruction I already have. Cheers Colin

Hi Rovcomlite. Im getting to the stage where I have to turn ignition off and then back on, I'm them clicking 'CONTINUE' but screen isn't giving any indication of it reading the new code, its just a blank white screen. I then go back into Gem ECU read faults, say didn't learn code in valid time.

Hi Thanks for reply....sat in car right now.....just looked at faults on ECU.....found a list of code numbers but all saying the same thing, ' In valid Code' should I write a different code number in the Becm (65535) and try another re-learn?

Hi These are some old instructions I have been using. 1. Open Vehicle Explorer 2 Settings 3 Com port Settings 4 Auto detect Port 5 Click on Continue From Left-hand Menu Select 6 ECU 7 Petrol EMS 8 Read Settings Now this is what ,I've been instructed to do, just scroll through for EMS CODE when...

Hi Sat in my 1997 p38 4.0 Range Rover trying to find my EMS Code. Its a while since using my Rovacomlite. These are the selection taken after detecting coms port. 1 ECU 2 PETROL EMS 3 GEMS 4 SETTINGS 5 READ SETTINGS It comes with some segments, which have look in, but just cant find EMS Code

Hi I now the the Blackbox Solutions modules ECU, Becm.......would someone give me some step by step instruction, eg what I should check/ be looking for when using these modules.

Hi wammers What is Mil lamp out? Why would this happen doing a normal job on the vehicle? I replaced an engine before and never had this problem, could you expand on what route I can take to solve this....do I need a plug diagnostic kit?

Hi After finishing replacing my head gaskets (which has taken me awhile to complete), recharging my battery, I got no response from my engine. The 'CHECK ENGINE' symbol doesn't go out, I'm not receiving message 'Engine Disabled' along my dashboard which I can usually solve by pressing my fob...

Hi I need a rear ashtray (complete unit) and Drivers door mirror Black plastic, heated, remote adjustable type. how much (Postcode HU179RU)

Hi Thanks for all your replies. I think I will remove the multi block connectors and solder the wires, this would be better long term as well, I will also work through your other suggestions. I will get back to you and let you the out come. I've manually inflated my suspension for the weekend...

Hi I looked at the two white multi-plugs today, unplugged them sprayed them with contact cleaner. Tried my EAS lead again, and it showed a full page of faults, too many to list on here. I have had something similar before, then cleared the faults, then it usually come back with an actual fault...