How is the cabin filter, have you checked it also?

Mine has 6mm bolts too but the plastic cup where they sit is so tight that some sockets doesn't fit there. Try to find a socket with thin walls. When changing the pollen filter I also vacuum the air box to get all the dust and crap out.

For real winter conditions I'm using 16" wheels with studded Nordic winter tyres, so that's covered.

Just changed to winter wheels on my FL1 TD4 Sport and started thinking about getting new tyres for those 18" Sport rims. Anybody tried Falken Wildpeak AT AT3WA? Reason behind choosing those is that they are winter rated and living here in Nordics we have true winters and especially long spring &...

HDC

Just relaxing on Saturday evening.

Looks like we are seeing the first hint of winter here next week - changed from 18" Sport summer wheels to 16" winter wheels with studded winter tyres.

I have done multiple diff oil changes with a manual vacuum pump and then used the Transmax bottle to pump the new oil into diff. It's doable, but not enjoyable. Recently I found a cheap electric pump meant for diesel and stuff. It did the oil change nicely. Pumping the old oil out was actually...

Good picture there. Any taller tyre size means you should use something like 30 mm spacer to get enough clearance.

Answer found from this old thread: https://www.landyzone.co.uk/land-rover/freelander-facelift-heating-control-lighting.155771/

Looks like 1 bulb change is half a day job...any tips to get to those bulbs behind the heater knobs?

Yes, removed the old one and added a new one. The story is that I just replaced brake hoses and front calipers. Before the job I had nice braking and good pedal that didn't sunk to the floor. After replacing the hoses and calipers tried to bleed it, no luck. I don't ecen know how many liters of...

Took the car on wheels and drove it carefully on my yard. Breaks are very poor, car will eventually stop but wouldn't drive on public roads. So back to bleeding then.

This design is somehow different than any other abs system? Like Freelander from the same era?

How can it be normal to have the pedal sink to the floor? It's closed system, where does the fluid extend if it is not leaking?

Still not done with bleeding. New master cylinder in place and done numerous rounds first bleeding the ABS modulator with Foxwell tool, keeping the pedal down and air screws shut. Then going through every corner in order both manually pressing the pedal and by using the Power Bleed in Foxwell...

It was definitely struggling especially with the fresh 75w90. Old oil was still warm and thinner after driving, it came out quicker. It's not used daily so I'd expect it to last several changes. Should have got 2 of them...so cheap. :rolleyes:

Changed the diff oil again. Found a cheap 25€ 12V pump that makes this task easier. It's not meant for gear oil, but it did the job, both ways.

And yes I have tried all the possible bleeding orders, including one in the manual :)