Looking for air intake hoses 200 tdi with 300 tdi manifold in defender 110 Pu 3” hose between air box & turbo inlet I could use a 3” flexible exhaust tube for set up. The air intake hose from the wing in us is 145$ us waiting to find the dimensions & the connector to elbow is No longer...

Disco 200 TDI engine in 110 PU The clutch parts fiche are noted with engine numbers since the engine is a disco transplant do I use a clutch for year of disco 200tdi engine or for the truck model year? Replacing transmission with a rebuilt F series there is a D in truck now. & clutch parts...

So if I may ask would there be a difference in clutch kit for 200 tdi & 2.5na? 110 Pu originally had a gas I believe. Was going to order from Paddock or do they sell britpart?

Looking through the wiring diagrams the screened alternator is 45 amperage Assuming a Xmod modification. But lasted over thirty years? I took iapart the original screened & only way for those bolts to be installed is when the unit was built!

I have always thought the standard springs on these trucks/tractor are of good quality I clean & paint them trying to keep clean the markings. & use good shocks.

Okay I tried the key & yes since this truck is civilian model it does have a steering lock needs key. other truck 90 Xmod has no such things as steering lock. At some point the dash will be apart & will see what that looks like. thnx.

Yes there is that best left alone. Looks like I should be able to wire as per other truck 110 but to be sure will wait for a diagram

You mean that thing with the key? Had not thought of that, I will need to get battery from other truck test it out.

With the steering arm unattached the steering wheel will not move, besides a little each way then comes to hard stop. Worked when I drove into shed some years ago none of which was touched.

This alternator is same as on 110 PU slight difference in wiring tho. Will have to wait for supplier to verify next week. The cover screen supplies some protection? As it was mod.

110 PU ongoing project have rebuilt front end twice really first started with putting 90 front parts On 110. Included HD axle of which seemed not to work so moved everything back that was moving three differentials twice. Now almost have rear end rebuilt. And looking at steering rods that were...

Truck died when I drove into garage should I be so lucky. Anyways new alternator appears the same, I would like to use cover that is on old alternator below. The three holes on new alternator appear to match where the mounts for cover will fit. This will require removal of the cover to insert...

Having said it has taken a while as in years unlikely Paddocks would take something back several years later! These were in a Bearmach box as I did not specify. They did fail during install I assume fault there.

Buyer beware

Yes brand New Years ago from Paddocks. Took awhile to get to this job, but I am friends with a welder.

Fit rear brake shoes drum type 110 PU L went on fine R side not so well. The bottom end weld broke, Working to get things going to move vehicle outside. I did finally yes turn adjuster properly and install shoe onto bottom clip. There is maybe a half + millimeter space after I bent things up...

FTC3511 & FRC8221 Yes outermost is flush assume the inner part of seal Meeting axle stub with spring is proud of that.

This hub &seal.

Rear hub inner seal 110 PU With Salisbury rear, this has one seal on the inside of the hub. Rear Axle 21S20055A wondering is there listings for axles? And the inner seal on the rear hub I was told to fit flush? Usually these fit 4-5mm in? If anyone knows better, thnx

after getting the wrong blinker lights, washer wiper switches I got the correct switches for 90-87 model. Thinking they were all the same I ordered from fiche of earlier 110. But with switches installed there is a mechanism in the center (blue) that needs to be with arrow towards blinker switch...