At the moment... it lives again.... Need to remove the scratches from the exterior paintwork, but it looks like it needs re-lacquering and more detail in the cleaning. At least it doesn't smell like a dog now. Also... notice the Sony Digital Radio.... Uses USB Sticks, iPod or Android devices as...

Guys.... bad bad news I'm afraid. The height adjustment on the MG seats cannot be removed, and the subframes / sliding rails are made for a flat floor pan. the freelander seats are specifically made to be bolted to an uneven floor pan, and the legs cannot be removed from the original seats...

As listed above.... Air Con Pump to fit BMW M47R Engine - Either Rover 75CDTI or Freelander 1 TD4 £40 - buyer to collect from Nottinghamshire - was working when removed from car.

I have a BMW M47R Engine sat on my driveway waiting to go to a new home. It comes without ancillaries - no flywheel - no turbo - no air con pump or mounting bracket. This is basically a bare block and head with waterpump / thermostat. Was removed running from TD4 Freelander. Pros.... - Sounds...

Due to a dodgy seller in Hull I have 2x part sets of Alloys for sale. 2x 6 Spoke Alloys 2x 5 Spoke Alloys I'm happy to do a deal if someone can provide me with a set of alloys for a 2003 TD4 SUV Freelander. I'm but them on eBay for £25 per wheel. Assumptions to Consider:- No Chunks Missing...

Blasting with the steam cleaner and WD40 seems to have worked... I'm going to pull the alternator off and replace the Rectifying / Brush pack... All lights off at the moment.

@GrumpyGel Can't I use coffee grounds.... I don't like tea :-( - or do you have another idea for tea leaves (over here that's slang for thieves - lol) You watch... the new (well.. low mileage) gearbox I've fitted will have a fault :-(

If you have followed my posts... old freelander stood for anbout 4 to 5years with a dead engine (and no bolts holding it in) I refitted a new engine and a new gearbox. drove it around for a few days / weeks.. occasionally, the alternator will illuminate.... it doesnt have a sequence or any...

Just an update to this..... I think it was the old fuel in the car (after it had been stood a looooooong while. on the last fill up, I put a redex diesel injector cleaner in the tank..... actually over dosed it.... a 60Litre treatment for 10litres of fuel. since this, the engine has purred like...

It's funny how I read this post the day after..... Trying to fit older alloys to my 2003 td4.. What a joke.... my mate had with me He let me use his tyre machine.... I had a set of 15 inch alloys. Some having better tyres than on my steel wheels. So i broke them all down as the tyres were the...

I ended up getting the same unhelpful response from the main stealers too

wow... do you know "of such oracles??" - (in a "Percy" from Black Adder II kind of Tone) If he is passing by the M1 Junc 28 on his travels (basically NOT to make a special run to see me) - that would be great! I will P.M. you my mobile no. if he is passing sometime over the next two weeks. Cheers.

OK.... anyone with another Diagnostic tool what can do the job in Nottinghamshire please???? Kettle is ALWAYS on!! - lol

cheers... I will take a look and see if there are any victims.. sorry... friendly people in my are willing to try.

you dont have a link to the list do you??

Different cables...... I'm not discounting they are... but I would be surprised... especially as I get a reading from my VAG Rosstech VCDS cable and software. Yes.. a register would be good.... although.. I'm trying to get old of the data CD for the freelander to carry out some "research"

To add... Yes... TD4 - I used the original freelander injectors from the previous engine, because the engine I used was from a Rover CDTi. Ironically... i also had a spare (partial) set of injectors in the boot of the car - so I plan on using one or two of these to remedy the problem. In the...

Hi, After fitting a new engine and gearbox two / three weeks ago. the car has developed a misfire when cold and idling. I can rev the engine through the problem range (less than 1800rpm) and drive the car ok... although a bit flat. I have 2 or 3 spare injectors and could do with seeing which one...

Nathan, This post should point you in the right direction for the bonnet release.... hopefully. https://www.landyzone.co.uk/land-rover/ing-bonnet-release-gone.129121/

A Question relating to a very old thread..... Is it possible for some very kind person to point me in the direction of the T4 Data for the Freelander 1 please? I'm testing the software with a SERIES of cables, dongles and adapters... hopefully I will have something to do the job I require...