that's what is throwing me, other axels I've worked on have a thread. Neither the axel or the breather have a thread, it looks like a interferance fit. Super glue sounds like a short term plan! I guess I could tap it out and make something

its a td5 90 btw if it makes any difference

has anyone else had this and how do you stop it? The breather isn't blocked but it isn't held in very secure and nearly comes out on the motorway soaking everything in diff oil. I've two thoughts, zip ties or some kind of instrument fitting screwed in.

where are you? I'm debating selling my spare

I changed my slave a while ago (last year!!) because the seals had gone and was advised to do the master cylinder at the same time but just haven't got around to it. Anyway I have a few days off and I'm going to do it. But I also fancy fitting the spring with less resistance (td5). Is it easier...

I think its because the turbo waste gate is shut as the boost pressure will be higher, the turbo has a silencing effect and the waste gate opening makes the motor louder. So at say 60 mph it might have been making 16 psi boost with the waste hate opening slightly. Now it might be set for 20 psi...

I work on a refinary. it is just additives mostly. However supermarkets sometimes use imported fuel and this can be quite ropey at times, hence I always fill up at branded stations but always buy their cheapest

it's a group on Facebook that is sharred openly. a lot more people see it than forums as it pops up on random pages when some one likes or comments

I would redo the seals again. I did mine and id not done a good enough job the 1st time. whilst the injectors are out you could examine the pockets for signs of damage and cracking. Some people have had them welded up and had no problems

mine was caused by the throttle map switch contacts on the transfer box. When wet it must have been opening and closing and switching between maps. It took me 2yrs to find it! I tried turning the snorkel head, sealing wires all over the landy and protecting them. It always happened when in spray...

if the oil is going up do the injector seals 1st.

I've done the driver side rear and passanger front on my td5 and binned the spacers. When I do the other two I'm going to make them adjustable too

I have a k&n panel filter I could sell you if you want to try one

get pics up and get it on landy watch on facebook

yes. The back flow of fuel makes it come out

mine fell out but got trapped on the suspension arm the 1st time. the second was on the back of the starter motor. Oh the fun I had finding it

just remove it but be careful not to pull the push rod off as it's a absolute **** to get back on. Ask me how I know

the bite on mine has gone very high after towing my caravan on big hills and doing lots of hill starts. I will adjust it and hopefully this will cure it

is the slider working fine in your front prop. Mine had seized and it was giving me all kinds of problems

and here it is now just taken on the works carpark