So i'm about to attempt my third try and getting the dam air vents to seal and stop the puddle in the footwell, With a new set of seals, again, Firstly anyone got any tips how to stop them leaking, Second when looking for tips myself on utube i spotted that some people put the seal on the flap...

So the plot thickens for the good . Got under the bonnet. Pulled the cables out the back of the alternator for a clean, and found one of the pins had a connection with no cable attached. So decided to trace the loom and found about 8 inches away the loom covering changed to a wrap rather than...

So. I'll order that in clean the mess up all at once. Final question, does the fuse box need two feeds. Eg whilst I am there it's not going to be much more work adding a cable in. Especially if there is a spare pin on tbe plug. I've got nothing that needs it from a load point of view. Just...

tottot, top man. that must have gone missing. is this what you mean, as can only find cyb400

I think I might be changing the wiring. If I'm reading this photo correctly. I'm hoping i find another wire later when it stops raining and i can finally get under the car

Better photo 2nd time around

So a little advice please, So spotted the alternator was not aways charhing the battery, but one the engine got warm it would kick in. However today not being damp it didn't So stuck my hand under the bonnet to find mucky connectors which obviously wouldn't be helping. Gave the feed to the...

Thanks gents will those suggestions a go

Hi. It's a 1986. 90. Door card removal not a problem, they've been off several times before. I just didn't want to start poking at the mechanism with out knowing what I was doing. The handle position does not make any difference. It is bound to be a simple fix.

So probably an easy question. How do I stop the front windows from dropping down an inch or two every time I wind them up. Manual winder. What is loose or worn out

So a quick update as its been a while With a number of loaned and borrowed parts i started testing First replaced two LED's with normal lights- no joy Then fitted the Wipac relay - a little joy, a very faint glow from the dash So fitted the LED with the extra earth wire- same again, a...

hi, yes LED's all around, not touched the relay

So check the earth, even ran a new cable as a temp measure to a solid part of the car, still no joy with indicators or the hazards, My original theory and advice was to refit one old bulb, due to the reason mystery just posted, so will give that a go and let you know how i get on.

so thats a negative, turned the bulb around and still does not work with the indicators or hazards . ???

hi, no, doesn't flash with the hazards, i'll go and spin it around right now

Back again gents, So bought and fitted the LED dash bulb with the extra earth, but no joy, still no flash on the dash. Thoughts, what do i check next and how.

thanks, will give the earth bulb link a go,

thanks gents, that not the answer i was expecting,, I had previously been told / found if i replaced on Led bulb with a normal one it would sort it

A little help and opinion please, So on my 1986 , defender 90, I've done the full Led light conversion, all works well except the indicator light on the dashboard never flashes, it makes the faint noise, but that's it. I think i know why they is and how to fix. but I would like a second...

Hi yes, came to that conclusion last night, home made immobiliser, aka Mad Max.