+1 I’ve that fails you can get a cloned one now from them companies that come out ive you lose your key my neighbour he’d his merc keys replaced

Yer batteries all good Dan I’ve got two

Cleaned up the earth wires still no change just when switching off it says traction failure had binical out and checked all the bulbs all good at a loss now

All my sensors read that 2.30 on the nanocom Dan I’m talking about the small plug that goes into the ecu

Been on Tomlinson’s post about abs problems seem to both be getting same results for a cure does anyone know what the readings should be on the sensors pins that go into the ecu with ignition on or off or does the wheels have to be moving to get any sort of readings I’ve tested the big plug and...

As data says I’ve you getting a message on dash could be becm related sorry to hop on your post I wasn’t getting message on dash about abs just traction control but have removed earth under the fuse box to clean it up and now getting abs fault message and the dreaded light will check when its...

I don’t think mines becm related it’s been on vacation to Rick

Mines exactly the same there’s nowhere to look I’ve my nanocom can’t shed any light on codes I may check out the nanocom forum tonight see what’s said on there I will report back to you I’ve find anything good luck mate

Just checked my brake switches on the nanocom I think you said one of yours says open the other closed when I press my pedal both switches go from closed to open I’ve that’s right I’m not sure but it may help as for running the car up on stands I’ve done that and still got the lights on and no...

Is it the sounder or the horn

Well I’ve you ever solve this problem let me know how I’ve read on the nanocom ecu page and it says I’ve getting audio tone aswell then could be the pump or valves I’ve got the same faults as you have done every test with nanocom separately and all coming back as there readings say they should...

Are you getting a audible tone aswell as the lights

I get them on mine but it’s unlocked

I would like to take my 22 year old p38 into a dealer for repairs just to see there faces

RIP Alan condolences to all his family only spoke to him couple of times great banter and very knowledgeable will miss his humour on here and thanks for the updates mozz

I may have missed something but did you mean you had the car running up on 4 stands in gear running and you went underneath it to check for vibration????

I’ve you follow Blackbox advice on powering down & on it won’t freeze and have to be sent back to them at the cost of about £100 to fix ask me how I know

I think it should be on are you sure it’s not just for working with the nanocom for the blend motors

He posted door locking unlocking cured so hopefully he has the remedy

I’ve the garage did it with a nanocom then it should work and they should have asked I’ve you wanted eka code turned off I think it depends on your becm locked or unlocked are you sure you got the correct eka