I thought disco td5 turbo wastegates were vaccum? If you tee'd in to the pipe going to the wastegate....is it boost of vacuum you are seeing?

The jig is impressive..... The disco...every one of the many Ive broke up and scrapped was better than that :) Why no turbo?

buy a second hand one for 25 quid

Air chisel.....1 brrrrrp and the fan is off :)

pic of the pump..... Autos have eletronic pumps Manual could have an immibiliser bit on the back of the pump

Dont know what it is I used, Its Ford stuff that I aquired :) Its a silicone type sealer but black so not so easy to spot as some of the blue/orange/white stuff .

did you put sealer on the metal gasket? I always have and never had an issue. :)

Does that translate into the owner doesnt have a ****ing clue....thats why hes here asking some other copy n pasters for an answer to something that 3 workshops say doesnt exist. :) As for binding....where...when? Its been road tested and all brakes are the same temp....??? wheres the...

I know :) I just think its amusing that and were now at the brake pipes rusting on the inside....FFs the chassis of a disco will be long gone before the brake pipes rust from the inside. :) The list at the beginning doesn't mention discs....so new pads on old discs and everything is supposed...

Theoretically a green man from mars could have landed and sabataged the brakes....again unlikely if you have brakes. But go ahead and replace all the rusted on the inside brake pipes if you like...you might aswell do it when you change the modulator that way youll only have to bleed the system...

A brake pipe with rust on it should not fail a mot. An "excessively" corroded brake pipe will fail a mot. A brake pipe will not rust inside unless there is oxygen and moisture in the pipe....unlikley if you have brakes. Replacing a rusty pipe will not fix your problem....better to stick to...

I vote.....Pan hard rod bushes

I know of a no. 4 injector in a 200tdi that would not come up. Guy drove about for weeks with no clamp and he drove it like he stole all the time... In the end after various attempts and stripping the threads from the injector then welding a bigger bolt to the injector to attach a giant sllde...

When I made mine I used the ramp at work for measurements.... Make it deeper than what you would need to work on a 4x4....one day you'll wish you did. I have a couple of concrete blocks and a scaffold batten in mine that I use for 4x4 fixing. Make it as long as possible. Depending on...

Ive a powered FM / DAB adaptor and use the original aerial .....seems to work fine for me.

Id agree with the transfer box ratio suggestions. 1.2 in my 90 but I think it would be better with a lower ratio....you just cant get fast enough on the roads here to get converter lockup. The Rangie in my profile pic as a 300 tdi auto with 1.6 transfer. 3.9:1 diffs and 285 tyres. Pulls fine...

If your doing the seal....heat the arm....a long bar from the top on to the edge of the arm where the splines are and a few smacks with a real hammer. Or split it with a grinder and fit a new one. Yes you can fit the seals from the bottom and yes it can be successful....you just have to know...

My disco 300 tdi auto gearbox has an oil cooler. Filler tube, dip stick kick down cable and brackets for fuel pump Not sure whats in the middle of that flywheel/flex plate...but you need the spacer shim - which looks there and which is also supposed to be measured and chosen to suit There is...

Sometimes its not the tyre size that causes the problem....its the hole in the centre of the wheel thats to big to mount on the machine. Theres always dynabeads? or a a litre of water :)