Cheers

Cheers

Bit of an update , got the front part of the chassis joined back together I added 15” in the middle. I made a couple of lengths of box up out of 3 mm to go inside the chassis legs then put some 2mm between and folded them insitu to bring it out flush and match it to the original chassis I...

Picked a axle up last week. I’ve got the others stripped to rebuild in boxes. So before I pulled this down I used it to setup the trailing arm mounts. Made some templates out of ply first. Went on ok in the end after a bit fitting. It was looking a bit tight to the spring seat. So I ended up...

Thanks very much

I’ve got a canny start with the chassis now Did some setting out and makes some reference lines. I cut it on the straight by the box as I’m going to extend it there , I’m thinking by 20” at the minute I the cut the back off in front of the rear spring seat and I’m using the section where it...

The shell is done now. Needs a polish but I’ll rap it up for the time being and start the chassis. Happy days

That looks great. And very well thought out How are you picking the drive up for the 3rd axle ?

Thanks mate. To be honest I have bother put the photos on. I think it’s a dark art lol.

All the welding is about done on the body now. Had to make a new lower panel today it was quicker than trying to salvage the old one. I’m using seam sealer on all the welds. I went over it all underneath with a wire brush on the grinder then washed them down with acetone and ech primered them...

This morning’s welding is going canny made the braces for the back of the sills and put an extra one in too. I never put the cut outs in the middle of them although no I’m thinking the front seat mount could be through it ? Is that right

I got a bit done today her tops off and she on her back. No pun intended. I can get the floor finished properly now , and make the support brackets from the sill to the floor. Bent a couple with me bender. Happy days

Hi so I got a bit done this last lockdown week, I ordered the inner wings from YRM , great delivery service even now and really impressed with the quality of the panels.I had to make a new top panel for the N/S inner wing as i couldn't get one it turned out canny. i forgot to order the battery...

turns out that YRM aren't far from me cheers

that's the type of thing but I think they are about 5k, im going to have ago at making something along them lines, there was a Esarco 8x8 based on a 110 I think they used two transfer boxes backtoback

yeah I was expecting some sort of engineers report or something . I have photos before because I know there is a type approval for some conversions

Thanks for the heads up on them just been on the site.I wouldn't get enough length plus and ive always had a itch for something with a 6x6 :)

Hi guys I'm new on here, I'm on with my disco, and have been able too get a bit more done during these unfortunate times (hope everyone is well ), I bought her getting on 19yrs ago, 3 days after my daughter was born so could never bring myself to part with her even thought she's been off the...