I think it is a good idea mate and after nodge can I bring mine down:D

Here is one I took a little while back I am going to keep it as close to the factory spec as poss

Just for future reference there is some one on fb who makes gaiters for the gear leaver (and autos) does a good job as well

not the one I was looking for but this should help https://forums.mg-rover.org/land-rover-176/facelift-freelander-enable-fit-external-temperature-ambient-sensor-766185/

no it is bog standard he took the old radio out and fitted a sony one in with Bluetooth, mine had a long grey plug that I needed to get a cable for when I did mine I would have thought with his being just a year older it would be the same .The best thing to do would be to remove his sony and...

My son has asked me to find him a lead for his steering wheel controls for his 2005 1.8 I can find them for a td4 but not his . Am I right in thinking they would be both the same ?

You can fit a double din in to that with an adaptor plate you will also need the correct cables to use the steering wheel controls , power .speakers ect I have fitted an alpine single HU in to mine . Started off with a generic adaptor but in all honesty they were crap so I managed to get an...

When I first got mine I had two different types of locking wheel nuts on ,I took it round to my local tyre fitters and one lump hammer an old socket and less than 5 mins later they were off:D

I replaced mine with a OE blade and mine leaves about an inch at the top as well

looks like its back to the drawing board , my reasoning behind this was you have to get the fittings for a 3 door anyway for the solid one so why not get them for the blind instead . I would have thought the boot size/width would be the same as for keeping the blind rolled out that is a work in...

I know this has been done to death and before you ask I have used the search button ,the reason I ask is when we go any were with the stuff that we have to take a hard cover would not be practical . Am I right in thinking the fittings that connect the cover to the boot are the same in either 3...

had a word with my friend and he says he brought it from here http://www.mrsteering.co.uk/

I know what you mean I brought a leather one tbh much nicer

Well they are a hippo after all:D i will get my coat now:oops:

A friend of mine brought a leather steering wheel cover that he had to stich over the original one you have to take your time doing it but his dose not look to bad . I will ask him were he got it from , on the same subject if it is leather can you not get something to repair it ? Like a dye or...

I have this one and you can get a free app for android (don't know about ios ) and imo it works well

Well it worked Andy got 3:D

:eek:Not that I am aware I will see if I have a picture

I didn't realise what a difference it made LR should have fitted them from the start just need to get some 501 led bulbs and it will be nice and bright

True the black is still the earth and the white tracer wire is to the ccu:)