I don't know if this is any help but on my sons 1.8 there is a small wire on the top of the starter when that broke and he turned the key all the dash lights would come on but that was it no clicks nothing. I do not know if the td4 is the same set up but it might be worth checking

For what its worth I used to use this bit of software http://www.imgburn.com/# never had a prob with that

This is the aux socket ,the socket is just wide enough to fit on to the back center console i used the four little lugs to fit.It had to come out because the kids and grand kids kept catching it when they got in and out of the back ,so as i said i took the middle bit out and fitted it straight...

I will post pics as soon as I can , i should have made the post clearer, at the moment I have removed the middle part of the socket and fitted that . It looks an easy task to fit the outer part but at the moment I am not sure if I am going to because it does stick out abit and lots like it will...

Fitted an aux socket in the centre console from a Nissan Almeria would you believe :eek: no messing with the wires ,just plugs straight in . And finally got hold of a surround for the single din sat nav and after a bit of alteration at the back , fits so much better . That's one rattle down...

Have you checked the fuel rail wires ? i replaced all my hoses and cleaned the manifold when i first brought mine and it ran like a bag of bolts , then i found out about the fuel pressure harness https://www.landyzone.co.uk/land-rover/fuel-rail-pressure-sensor-harness-change.154473/

Does any one know the part number for the top hose for a 1.8 Freelander face lift ? the one with the bleed screw Thanks My sons has sprung a leak

Its alright for you lot best i get my carpet slippers and pipe out now god i feel old:( what have you done to your Freelander to day "managed to get in it with out slipping a disc" :p never grow old chaps

I am sure you can get it cheaper but me thinks this is what you need https://www.island-4x4.co.uk/fuel-pressure-regulator-repair-loom-ymq503320-p-6875.html

I used two ,used one left it in for a while then jet washed it out then used another and left it over night then jet washed it out , then for good measure i washed it out with truck wash . What i would also do is buy a stiff bottle/baby brush and give the manifold a good brushing leave it for a...

For what its worth i have a td4 F1 and i had/have the same prob also i have blanked my EGR but what i have noticed is if i go on a good run my engine does not miss fire ??? it seems if i have been running round town I.E short journeys then that is when the engine is lightly to miss

What is the best way to check the lower engine tie bar mount ? i have a knock and it is intermittent and bloody hard to find but i do have slight vibration so i am hoping it could be that . I do not want to high jack the thread but @Arctic2 i noticed on one of your pics of your tie bar the top...

You can get a cheap reader Elm 327 and a free app for your phone , i have it for my freelander 1 and i know a few others have but i do not know if it would work with a F2 but i am sure some one will know

Mr muscle and a jet wash be careful it will go every were

I think the op will be ok then last time I looked there were not to many deserts in Lancashire:D I bet he wished he had never posted the question now:oops:

I did warn you:D

What ever you do don't say that:eek:

You are quite right there ,the last thing i want is my nuts twisted:oops: so thanks to the advice on here i think one of these might be a better option...

I stand corrected NUTS...:D:D

Are we still on about wheels:p:D:D