I'll have a look when my son comes home from holiday. I confuse yellows with greens etc

Yes all units are wired

You may notice on the back of the speedo some exposed copper. A previous owner had been feeding off various cables behind the dash and just cut them off later. I thought the stabaliser was the small unit behind the speedo.

Hi The first one was behind the auxilary dash bolted next to the hazard warning switch. This is behind the speedo

Hi folks, I have these 3 flasher units behind my dash, can any one id them please . Front end partly assembled ,front wiring only, Every thing was working until there was a little spark then the indicators stopped working;.fuses still ok It happened when I was repositioning the fuse box...

Well I am reading from the correct diagram now. I cant find the other file on my pc but I took a poor photo of the pdf which shows it without the link. could be confusing without the correct info.

Hi sorry it is a petrol 2,25 4 cyl, I checked my wiring diagram printed off the internet and it doesnt show the link. I looked in the manual and it was shown

Hi Folks I intend to move the fuse box to a more accessible position with additional fuses for radio etc. I expect this current box has been pulled about by previous owners. Does anyone have any opinions on it? 3 browns on (1)---------- (2 ) one white and 1 purple (to...

Hi I do have it fitted now, I fiddled about until it went in.

It does look different, but that's the one that came off. It screws together as shown in the manual but it wont fit over the parcel shelf, no room.

part number 347646. a small bracket of sorts under the steering cowl. I know where it goes and how it screws to the cowl, but cant see how it fits elswhere.

Update on cable.. It is too short! Inner and outer. It fits in the tapered slot ok Correct part number for model as per the book etc. Weber carb fitted. Any idears about this one?

I ordered a cable from Paddocks 599312 it fits in the slot but the length looks short. Find out later when the wiring goes back in.

Update on this I called my son and he looked at the photo and said it may have come off his Midget which he broke up years ago.

Hi folks, continuing story of the rebuild of my sons series 3 1983. In the pile of parts was this choke cable. I cant seem to make it fit anywhere so suspect it is not the correct one. rhd 1983 . Any thoughts here? cheers. part number in the book says 599312 for one with steering column lock.

Updated sorted the problem........which was myself:D. When refitting the unit together 3 years ago., I had fitted the levers upside down. No wonder it wouldn't fit.

Hi folks I haven't been here for a while and the part rebuilt landy has been resting quietly in the garage. Question to ask is.... I have fed the heater cables back through the dash etc, but when trying to fit the end cover back, the cables bend too sharply and don't look right. Does anyone have...

Going back through my earlier posts I note that someone said that the later stubs were manufactored to accept an oil seal which the earlier ones didn't have. This is an older pic ignore the scoring at the centre...

Hi Joe, Both shafts connected by the uj have passed through the swivel pin housing/bearing and oil seal and are engaged in the diff. The stub axle slips snugly over the half shaft and is centralised eventually by the hub drive member. when the half shaft is pulled outwards it touches the inner...

What stops it rubbing together James?