yes we had just a few eas faults! it took a while to get to the bottom of it but got there in the end with great help from the guys on here:)

no way!! are there any other sellers you could try?

hi all i hope everyone is keeping well and spirits up i bought another one of these.. 1/4 drive ratchet double ended so one end is the standard 1/4 drive and opposite is ratchet for hex bits both ratchets are a nice smooth action and feels good in your hand, almost like quality it did come from...

hi there do you have access to a diagnostic machine reader to check actual values? i know from experience that the nt530 foxwell will read this and tell you what pressure is being made,what valves and exhausts are doing also, sadly with out diagnostics you could get lucky in changing something...

hithere @Big_Rig1988 thats seems like a good place to start...from memory the ecu is 12 volt fed but then works on 5v , so seeing that is def not right.. easy to fix if just a sensor ,(but non genuines can really play you up,and brackets issues with those too, i.e weak and bent, none gen chinese...

hi there @Big_Rig1988 mr @stustrong is very knowledgeable, and got myself and @kds upto speed with the inpa, ( big thank you stu and ken ) if you can get in and interogate the eas ecu and see what its upto 11bar pressure ish is what it should produce..but if its a bit lower than that you go into...

@steveeasy hi there, i put a post up a while back about my day out at an indi garage..thats why i started.... 'you know when i...' re garages, they are a bit like cars.. some good and some not so good, that indi garage did have a very expensive autologic diag tool, but he seemed to be more at...

@steveeasy you know the ' great indi garage ' i went to... balls'd mine right up, he made it lower, then lower, then so low it was in access mode. he was using dealer scanner! i think he likes 90s and old crusty stuff.. l322 seemed beyond his abilitieso_O thats when i got the two diag tools, it...

@steveeasy i lay odds on the inpa being ordered and installed within a month:D the storm clouds are gathering;)

hi there @steveeasy yes the link i sent was the one i used, i think it does bmw x5 and audi all road, i went for this as the rings were about a tenner, and bagpipin andys are about £25 with p and p, so for £15 i thought a no brainer, it really did the trick, i had andy fultuns video on at the...

hi there @steveeasy some of those rings are f in useless i went through 3, two from one seller and one from another, they say they get some back from time to time so i went with a cylinder and ring from the bay' sorted my issues, and the same thing happened to mine , the ring only repair...

hi there @stustrong if you need a quick fix, clean it with brake cleaner and use jb weld epoxy, it bloody great stuff, some viveos on utube land,, ive used it with great results

hi there @gold rover i braved the wet and took a couple of pics inside the car with the icarsoft lr v 2.0 connected, they might not be in the correct order, it has good coverage from the 02 05 rr right upto to late models, plus the other lr too.

hello mr @gold rover hows the weather up there yes i have the icarsoft lr v 2.0, there is an earlier model not to be cofused with which isnt as in depth as v 2.0 its well made and does a lot of stuff, shows offsets, but wont calibrate eas, i have the foxwell ( a@ kds) and inpa for that very...

@steveeasy hi there, have you got a picture of your compressor, ( we are talking of air compressor in boot ) as i changed my piston ring and barrel/head , but it is dry, no oil in mine only excessive wear on the ring i only know about my type which is the wabco,and is def' dry. the later type...

if it helps...battery chargers,with the cold weather here i found this back in late october, i fitted a new large battery and didnt want to have any issues with something not shutting down / drain so after seeing many you tube reviews i bought this one its has many of the features of the cteks...

hi there @Simon inskip i havent done disco, but i have others and re covered a l322 range rover in the end it turned out well, having had rovers jags and range rover, i know they dont stay up for long and end up like a pair of curtains.. but its very messy, i found the lining had come away from...

@steveeasy hi there bc cables on the bay cost a bit more blue in colour, but the chinese silver cable work too, some have a switch some dont. i had to fit a switch to mine easy to do lots of vids on youtube showing , either directly soldering across pin 7 and 8 or adding switch. and inpa...

@kds it could be worse.. really.. could have been trying to climb into mine.. remember this pic:D:D:D:Di get vertigo just looking at it !

im still having flash backs from using the foxwell..:eek: my fingers and thumbs do strange movements.. where i got repetitive strain injurys from constantly using that fecking tool:mad: