Yes I am certain I have it that way, but will double check tomorrow. Just to make sure where I have them now, Stalk Full forward it is in High Beam ie as if you were blinding someone coming towards you, Back to middle, Low Beam as in normal night time driving, Think I must have one wire wrong...

Thanks will do that. Bloody Headlights . Well can you remember when I changed the wiring from the Yellow and White coming from Stalk, and I was Adamant that they were working properley, Well I was Wrong Again, I thought I had them. with full forward High beam, back to middle low beam, then...

Yes forgot to tell you that when I wired up this way the warning lamp was on constant all the time with Indicators turned off. but flashing when Indicators turned on, Using it for now to set things up. Got all lights working now except for 2 Indicators which I need those parts for, Still got...

Wil order 2 of these then, wil this flasher be ok ? as can order from same place. CLASSIC MINI INDICATOR FLASHER UNIT MK1 GFU2103 59-67 DELUXE COOPER 1071 998 7B1 | eBay

Thanks will leave them at top on rear. Thanks for link, just wondering if they will fit in to the rubber sleeves

Think I will order a couple of these to save all the hassle , Land Rover Series Military Screw Lens Side Indicator Single Pole Bulb – embertonimperial that rusty one in pic might work if I clean it up. Something that I noticed was On the ambulance the front Indicators are on the bottom and...

Thanks will order one of those you mentioned, but will use this one untill it comes. Another thing the side light and indicator connectors, I am 2 Indicator connectors short. the 2 brake lights at rear are double fitment for the bulbs, but the Indicators are single. but the 2 I need single...

Thanks Do I need to Earth it ?

All my local shop had in was this cheap one. , It works the Indicators but depending where I put plugs can only get either working with warning light on in cab and no bulbs working outside, OR bulbs flashing outside and no warning light inside,

Thanks sorted wires got all 4 working on test bulb But when plugged back into Flasher there is nothing no power no noise, do you think flasher us knackered with all the testing ect ? It is a brand new Lucas

Well what a bloody Nightmare this is. Problem with Headlights again but think I might be able to sort that. Anyway It was a bad connection on the passenger side indicators where it joined the wire on column stalk in dash. wire is now good from front to rear Now I can get all 4 corners working...

Got a mate with a bench grinder and wheel gonna drop them off for him to polish up.

I can check both ends to where they enter chassis at each end so if its inside chassis can't get to it. How do I check with meter ?

Just about ready to fit these military lights once I get wiring finished.they have been painted over so do not look there best, sand paper is getting it off but will take bloody hours. Anyone know a better / easier way to get them back to shiny

Not sure as testing these ones with test bulb on hanging wires, , it works on both rear sidelights and Drivers Indicator but Not Passenger .

Yes that was already done and only got the 2 fronts and drivers side rear to work. Bit of progress now though, there was 2 R/Bs at drivers rear and only 1 at passenger, when I joined these 2 together at drivers rear I finally got passenger to light. Now I have all 4 Side lights at each...

the red on the driverside should be connected to the red black at rear that works tail lamps . Sorry which Red do you mean ?

Which Red on drivers side? There is no reds coming out at rear.

Thanks You. will get these tidied and taped up, This is what runs through chassis to rear. R/B R/Y G/R G/W G/P I know what each wire is for from your previous help. Drivers side First Pic, With Test wires and bulb I can get indicator and sidelight to work, the side light only works off...