Not sure what that is but will ask the guy I sold it to if it is available

Sorry no , which bit do you need

Radiator is new, there is about 10 degrees difference from top to bottom, ie if top is about 60 then bottom is around 50.

Tried running it tonight Without NO thermostat but just the same temperature rising all the way up to 90s. Does this rule anything out or give anyone more clues as to what the problem can be ?

Well please forgive me but now I do not think it is fan or water pump as it does seem to be circulating the water as it should. Tried again this morning with tap closed but although I didnt let it get to hot it was rising as before. Then tried again later with burping the system with one of...

Will give it a go but To be honest I have tried everything as this was brought up a while ago , Now when I bought the engine it had been fully rebuilt by the MOD BUT the front 8 blade 24 volt fan was damaged ie bent to f!!ck, was not bothered as plan was to change everything to 12 volt, now I...

This is tap that runs in to heater in cab, do you mean turn this off and try /

Have checked stat and it does open as it should, the readings for it were on the housing. not sure what my cap is but here is pic.

After about half hour temp gauge goes up to red , Not loosing any water, heaters work. brand new rad thermostat and all hoses. Water does not seem to be running through the top hose , then again I could be wrong. not sure if there is Air in it or if there is how to flush it out. Started it up...

Will check to see what cap I have

Went for the freebies for the mean time, might get a new set after the new year,

Mine is 2a there is a tap in engine bay connected to the hoses going in and out of heater, it is turned on at the moment. Will try temp readings with gun tomorrow at what Temp should I be getting in to the Danger zone, so I know when to turn it off ?

Left the gun at home so did not get a reading, heater was just turned off at switch in cab, the tap in engine bay is On so water will or should be running through it, I think ?

Finally got it fitted today, put the bottle on passenger side where the original would have been, wired it up to earth then switch/ button to one of the wires on wiper switch as you said, it worked great, Thanks Again. Had my first go round the field, only got it in to second gear , just a small...

Think the genuine ones will be to much momey. Which ones did you get? These ones might be better then the britpart ones Front Door Seal | Exmoor Trim

Thanks mine is series 2a but I have series 3 doors fitted, seen the stuff on a roll , might give the ready made ones a go though,

Need door seals, the old ones were riveted in but has anyone used these one piece ones before, I did fit them to a Dfender a few years ago and they were ok, but will they fit Series? LR077686 - 1 Piece Door Seal LH Series 3 and 90-110 (johncraddockltd.co.uk)

Something I forgot, washer bottle. Don't have one but would thus do https://www.carbuilder.com/uk/windscreen-washer-bottle-kit-13-ltr

This reminds me I have no seat belts at all fitted yet, looking at the link above from craddocks I do have some of the brackets but might be some missing . Would love to see some more pics of what goes where.

Might be sorted, getting these tyres from a freind, more for road but I will mostley be on road more then off. I will be using these rims when I get them sandblasted and painted