Received, as described and quick delivery time.

I'd look at making something to fit. Just needs a slot to go into and something to keep it there. Fixed in a couple of places to the plastic trim to stop it spinning round.

Put the original exhaust on and get a proper mot. In fact just take it as it is, then if it fails on exhaust put original back on within the re test time.

Will it fit a 13mm spanner and oily rag in? Pm sent

Short suction type, drill holes in base and tie wrap to the air vent.

Not much help but when you turn on the fan does it also open some flaps to direct the air? Could be loose. Does it alter when going from upper to lower vents or other vent positions if there are any?

I dont't know what Nodge68 thinks, but I'm not convinced the ecm is at fault. The CJB has its fingers in the starting pie, Encrypted data so I assume immobiliser type stuff. Data flow would be needed between the 2 modules and correct key being used. Its possibly provided you with a vin, although...

But if you do manage to reprogram the ecm or any other modules might be worth adding working reults and methods to this thread as well.

Possible when you try and reset and reprogram the ecm it blindly sends the data for so long before any ecm response. I think you need to establish comms first, checking data lines, powers and earths at the ecm. Do you get communication with any modules? I have no experience with the evoque...

My handbrake sticks on after a week, so I just leave in gear.

Can you rotate the wheel off the ground to see if it only happen a with weight on it? If 4wd then all wheels will need to be lifted. Wheel nut tight?

Am I stating the obvious but make sure you use axle stands if going under the car. A good jack is so nice to use, well worth the money.

From memory the only issues are removing the connections for heated screen as they can break unless you can wedge the window up so it won't drop when undone from the clamps. Make sure it doesn't fall down! The adjuster is a double threaded bolt in the middle that uses an Allen key to hold in...

EBay complete regulator is best option I think. Cables can be replaced but there is a knack to getting them on I'd say around fifteen pounds price, easy enough to change

Another useful link, ordered ready for next brake change. Thanks

Air temp drop can still be used to test. Also test air speed to check for blockages in pollen filter

Check display?

Decent garage is Tysley 4x4, based in tysley. Only does LR and all ages, not the most talkative guy but very honest and knowledgeable

Are the 2 pos terminals swapped on the starter?