this bugger?

Maybe an idler pulley?

The old volume over pressure chestnut😜

Nice show and tell kiddo 👌 thank you for sharing 🤩

Do a search on resetting the shoes the correct way, it'll explain how daft it is and how important it is to replace the handbrake shoes at the same time always.. 😬

Oooh the old discovery 3/4 hand break shoe reset thing😩

Ours just plugged in🤷

And lots of ways to take you off the road your on, then through the back streets just to be placed back on the road you were on further down😩

Like Google maps, it's awful to use now😞

What ee said👌

I went through this and bought the balance unit to go with a Kenwood head unit... Then after fitting a jvc unit it worked without the balance unit anyway🤷 My son fitted a fancy Bluetooth head unit once again without the balance unit.... The subwoofer plug had the yellow?? Plug removed and the...

The laser kit should be good and the cheaper kit will only do a couple of sets before it suffers thread loss. Either kit, make sure the threads are well oiled. When clamping the ball joints, tighten the clamp up tight and then shock the ball joint seat with a hammer to help release the ball...

Get it pumped upto height and then pull the big eas relay under the passenger seat, this will isolate the system allowing you to drive it home and get stuck into the problem at home👍

No doubt you will✌️😎

Result and patience payed off😎👍

My son's was doing this and reseting itself!! It had a failed driver thingy for the aircon that caused us no end of headaches😩 It seems the old units are wearing over time with use. We use both of ours as daily drivers so the wear factor is raised somewhat 🤷

Agreed, the p38 is slowly suffering the same issues. 😞

Oooh, I'll be interested to see your results for sure. 🤔👍

The actuator should have been tested before being refitted. Can you ask the garage this over the phone. If they say yes knowing the fault was there then this could give you a good indicator as to test the actuator. If they say no then there is a good chance the old turbo core was ok🤔

If you can get the vacuum pipe off the turbo bidy connection and get a vacuum pump on the pipe you'll see if its a damaged diaphragm inside. These turbos supply a vacuum from themselves and are independent of an external vacuum source. 👍