Noise that is making it will flick strongly as the failed joint rotates. If it is a failed joint !!!

Spin.just as in video but hold joints. inner and outer in turn.

With that much noise, get someone to out hand around shaft joints. Then turn wheel. They will feel it even if they are asleep if that bad!!!

If it is the shaft it is asking wheel tight to turn!! What about if wheel.is set to straight ahead.

That don't sound right !! It does sound wheel or brake or bearing related. Not a bent disc shield hitting summat? Wheel looks very stiff to turn. Might be worth popping driveshaft out and checking the hub without it fitted.

Driveshaft most likely

All body shells and tailgate doors are the same. Only thing I can think of, is the glass in the 2 holders that you tighten correctly?? There is a rubber channel sitting in the plastic holders. The glass needs to sit in the centre of that rubber. The idea is that there is a thin section of...

Sounds like you are going to glue your life critical brake lines and nothing is going to stop you. The warning has been made !!! I'm out of this thread. Stay safe all.

I have started a hand up acknowledgement to all other Freelander 1 drivers. Most just give me an odd look ! Selling parts has recently ramped up and so I think they are getting rarer on scrapyard.

Please don't apply glue to any brake pipe joints even to drive it 100 metres !!! It will end badly. Remake the necessary section and fit at a point where access is ok. I always use Kunifer not copper. Copper is too soft and the unions brake when overtightened or unscrewed at a later date.

Simple. At the bottom of the rails that it slides on there are 2 adjusters. One each side. So on the inside face of the door near the bottom with the door card off. There are 2 nuts and a torx shape bolt inside the nut. Loosen the nut and adjust the torx to bring the bottom of the window...

5,000 miles on Measuring 6.8mm all round. So say 0.5mm per 10k ?? OK so far !!

Hi and welcome. Ar that mileage the cost of a remove and replace for a seal, depending which one, pinion at front is harder, would outweigh a good second hand or recon unit. With the noises too it sounds like all is not well. Syphon out some oil and inspect it. Any signs of metal is a...

I wrote this all up for you some while ago in this thread. Thread '2003 Freelander 5 door Auto Tailgate Glass' https://www.landyzone.co.uk/land-rover/2003-freelander-5-door-auto-tailgate-glass.393663/ Wow was that really July !! Good luck

Yes. Must admit I thought the 2000 would be wabco but not. Yes Wabco is on the menu.

Check all intercooler hoses for splits and loose clips.

Screen shot from 2000 model year TD4 with the 'drive and ABS light goes out at 5mph ABS' known as TEVES Mk20. Some random data and rolling car for sensor speed on each wheel. You can also read and delete errors. Bleed brakes and re-calibrate the gravity sensor. There are more data options...

That was an L series for the engine ecu. I can check Pscan works on a 2000 model year abs if you want. Pretty sure it will.

Special O2 sensor socket won't fit in gap. O2 sensor is on the engine side of the exhaust manifold. if it is duff, best plan is to cut plug off it and thread a ring spanner on that fits tightly to prevent rounding. Then a sharp blow with a hammer to unscrew it. Soak with penetrating oil for a...