1. Freddie17

    Drove through 2 feet of water, next day, clunking/sputtering when turning left/right slowly?

    I’d put my first bit of money on front cv related, due to the noise on turning, if your symptoms are correct. Check the rubber boots for splits,,or play in the shafts. Take you 20 minutes and zero money to confirm/rule out, then go from there.
  2. Freddie17

    Freelander 1 Skid Plate Bolt Sizes + Engine Compression

    I always wanted to do something similar - just never got round to it!
  3. Freddie17

    Freelander 1 Skid Plate Bolt Sizes + Engine Compression

    ‘Tis one of the improvements on the F2… a smaller (and real metal) undertray that just bolts on to the car. Why they needed all that metal framework just to hold some plastic on the F1, I’ll never know!
  4. Freddie17

    What have you done to your Freelander today

    Sold gave my FL1 to daughter. She had better look after it !
  5. Freddie17

    Freelander 1 Skid Plate Bolt Sizes + Engine Compression

    They are different sizes… 2 at the rear are smaller than the rest for sure. 10mm I think. 4 in the ‘centre’ (2 each side) - this is item “2” in your parts picture. M10 x 25. Then 2 up front are bigger I believe.
  6. Freddie17

    Guilt by association and section 59 tickets

    Oh, oh, please sir… can we issue section 59’s to EVERY MUPPET TWUNT who sits hogging lane 2 or 3 or 4? And every Prius. (See above)
  7. Freddie17

    Freelander 2 2013 door locking

    This. Literally just done it last weekend! Remove the exterior handle also… then remove the whole thing from the door and switch the cables onto a new actuator ‘on the bench’… much easier. As it’s the front passenger door, it has the emergency key hole, which makes that handle slightly easier to...
  8. Freddie17

    Rear brakes TD4

    At the rear of the arm - the ‘pin’ end.
  9. Freddie17

    Freelander 1 Fuel Burning Heater - still on with temperature normal SOLVED

    Well mine always sat at 1/4. After the mod, it sits consistently at 1/2… bang in the middle.
  10. Freddie17

    Freelander 1 Fuel Burning Heater - still on with temperature normal SOLVED

    Goes like this… it’s a PITA working the stat into the hose!
  11. Freddie17

    Freelander 1 Fuel Burning Heater - still on with temperature normal SOLVED

    Yes - I’ll get you a picture this afternoon of mine
  12. Freddie17

    Rear brakes TD4

    I had an advisory on one dust cover year before last. If original, they are normally riveted in. Have to say, for the relatively low cost, and ease, I just bought a pair - the whole arm (including the affixed ball joint). Undo (3?) bolts, split the old joint and swap. (And realign). Do the...
  13. Freddie17

    I would just like to say

    Well 8kg of washing, when wet, will be heavier than 9kgs! Did you not go to school? 😂
  14. Freddie17

    Freelander 1 Fuel Burning Heater - still on with temperature normal SOLVED

    Had the in-line mod in my TD4 for 2 years or so now - no problems at all. (And nice and warm in winter). FBH works fine still 😁 Free tip - silicone grease is your only friend with this one!
  15. Freddie17

    What have you done to your Freelander today

    Your FL will love you even more.
  16. Freddie17

    I would just like to say

    We had a ride to Lundun last night. Picked up take-away Mexican (or ‘Meh-he-kan’) boxes from Zambrero in Eastcheap. Very. Tasty. Indeed.
  17. Freddie17

    What have you done to your Freelander today

    😂 I noticed the same last weekend. Need to get a new set.