oh can send you a list. will do that later. when have more time. i made a compare sheet with errors.

I have the complete fault code list. so i saw 33 is not listed. I search the web for bmw and opel, but could not find it also. It looks like it is p38...... I thought just askon the forum. may be somebody saw this before and know what 33 is........ i check several times after a reset if it was...

wel I have the error code 33......... I reset the error codes but fault code 33 is coming back after a while. It is not the start code or end code. that is 12. I am thinking it could be related to egr . but that is just a thought. (because this is one of the latest models with egr and may...

sorry press enter to quick. I mean the internal diagnostic has nothing to do with faultmate. It is independent and separate

nothing to do with faultmate

also not to me. There is a complete list of faultcodes available, but 33 is not listed......

oh you can read the bosch edc fault codes on 2 ways. 1) with diagnostic equipment like blackbox faultmate 2) Using the "flashing" check engine light method. I used the flashing check engine. This gives error code 33 (flash 2 times 3) for your information I use faultmate, it gives...

On my p38 diesel (year 2000 latest model with egr) I have a fault code 33. Is there anybody who knows this code? (code with the resistor on the obd connector. flashing the check engine light)

ah ok. thanks for the reply. I put my pump first on 3.5 mg/str It runs ok. but the performance was not so high. I did 3 measurements (only short distance, about 3/4 of diesel used) The first reading was 20% less on the display then real. The second measurement was 8,5% to low. Then i put the...

Hi Dannys, I forgot, beside your current fuel quantity, what is your timing modulation. (hot engine at ticking over) Hope to hear you soon. Thanks much in advance, Fredi

Hello Dannys, Great info! I am working on the same problem and find out the same things. What is the value of the current value now (mg/str). (hot engine at ticking over) I want to adjust my pump, so i am very curoius about yours. Escpecialy because the on board computer gives the correct...