So having changed the seals and washer on the pistons there were two types of o rings on the injectors. 3 black ones which were very worn and just crumbled so they were the issue. Now I have a new fuel pump, new crank sensor, new injector loom and seals and washers and she turns over like a...

ECU was bone dry, loom is pretty dry also. I haven’t reset the codes as I had to take it to a garage to get them in the first place. Will need to get them to do this and see.

So yet another lovely issue with my 02 D2. It decided to cut out on me whilst driving up a hill the other morning. It started to gradually lose power till it cut out. I decided to prime the fuel in case there was an issue with air or the pump possibly. once the prime finished it laboured a bit...

Apologies this is what I meant. That sounds good as I need to try and reduce the amount of heat by my feet in the summer and have seen this may aid this.

Evening all, hopefully you are bearing up well. I am seeing if anyone has any information as to whether the R380 gearbox has a billet deep sump cover like the LT230 or if they are in fact the same size and so would fit anyway.

Want to thank you guys. Got my old girl opening from a good distance.

Thank you, sadly out of stock but I have purchased one from Brit part so will be here soon enough. Thanks for your ongoing help with my issues

That’s the issue I have so I’m thinking defo change it. Cheers bud

I only have 1 fob, the fob transmits as I set the tv to an analog channel and programmed the channel to the same frequency and I get a reaction when I press the button. The receiver is the original one in the truck so I guess I need to change that out and hope it’s that. Expensive if not but I...

So I haven’t updated this recently but I have had the roof liner off, to replace that this weekend, as well as gained access to the receiver box. The key fob unlocks and locks the doors intermittently sometimes straight away,sometimes after 5 minutes. It really is frustrating. I have cleaned the...

Yes. It opening it setting off the alarm at 5.30 in the morning isn’t going to keep me in with the neighbours . The engine starting is loud enough.

I had been told that it is ywy100410 but I think you are more in the k ow from my experience

Amazing thank you

No they were new panasonic ones. Will have to find the part number and get one.

just going round the vehicle today pressing the key fob, it works only if I press it by the drivers side window. It both locks abs unlocks but only next to the drivers window.

The Fob LED flashed when I press either lock or unlock, I haven't seen if the dash one reacts, should it flash at the same time? I will have to go and have a look at lunch. What would it mean if it doesn't react to if it does? Thank you on this

Now has stopped both lock and unlock. I will look into getting a new receiver potentially, some posts have said I need to program it again others say its plug and play. Would you know if it is as simple as swapping it out.

It locks by the seems of it but doesn't unlock with the fob, I am assuming its a bugger hidden in the headlining at the back of the vehicle.

So this morning my key fob worked unlocking my doors but only after I pressed it for 4-5 times. I’ve been at work all day and it then wouldn’t unlock at all. I have had to use the key in the door which then triggered alarm till I put the key in the ignition. The battery is fine but I replaced it...

Stiff when going into first and down to second.