So im reassembling my 2.5 N/a and whilst putting the thermostat back together i found that the thermostat itself has room to move within its housing and this isnt something i noticed when i took it apart, that was 3 years ago mind. Secondly whilst putting the injectors back in they dont seem to...

im looking at the workshop manual and cannot for the life of me find the torque settings for the cylinder head, flywheel or clutch bolts ? anyone able to tell me what they are? thanks. Dave

yeah they seemed correct thanks! , just on the hunt for waterpump bolts now, with whats going on at the moment who knows when my delivery will arrive

hey guys, Struggling to find a code for the following, Thermostat Housing bolts BH106151L x 3 Stud M8 Rocker Cover Stud TDI 108091L x 3 Water Pump Bolts Kit x1 Flywheel Housing Screw housing to block SH110301L x 1 Sump Screw SH108161L x 21 any help with where i can find these bolts etc...

So i bought some U-bolts a while ago but when i went to fit them the threads were not long enough as if the axles were too thin or the threads rounded straight off upon tightening , im thinking of getting full new leaf springs also so what part numbers do i need to look for ? parabolics or road...

Have been going through all the paperwork i have on the lightweight and have come across a list of work that was done the last time it was rebuilt before the previous owners took it through Africa on an expedition. Unfortunately, no pictures of there expedition were included in the land rovers...

Unfortunately already have a custom cubby box between the seats that holds CB radio and some 12v connections. maybe could try to work around that.

One of the modifications im wanting to add here is a hidden winch that will sit inside the red box here, previously the vehicle had a box here which held a manual winch ( ive used it many times, enjoyable for the first five minutes then damn right annoying and hard work all round). Anyone know...

https://www.ebay.co.uk/itm/LAND-ROVER-LIGHT-WEIGHT-STAINLESS-STEEL-FRONT-BODY-FIXINGS-228-BOLTS-CLIPS-ETC-/221139027811 this guy does some good sets!

Managed to get back up to the car for a week for have been busy removing/replacing all bushings rebuilding suspension and new brakes all round. The new U bolts I bought for the front axle/suspension threads all rounded off for some reason which I was less than impressed with so having to wait...

My current thoughts on Land Rover bushes

yeah i got the 110 home finally, got a private garage to do it for a few pennies

thanks :)

Hey thinking about buying a land rover 110 from just south of dundee and moving it 112 miles to near elgin, does anyone know of any transport companies up my way as it does not have an MOT or can anyone on here give me a quote? thanks, Dave

yeah sorry ths is on the new 300tdi manual disco

driving back down south from scotland the other day and i noticed a scrapeing/werring sound happening whenever i was inbetween accelerating and decelerating on the motorway, after having another drive i have noticed it is only happening at the point where the strain comes off the engine and...

do i have to wire it though the resistor?

So someone had the bright idea of fitting an old alarm to my land rover, when i bought this he had already tried to take it out and now the heater plugs wont get power, I have power to everything else apart from the heater plugs, and when i try to wire them in from another source they dont...

its fitted with a turbo

and are the injectors the same ?