yes

the oil pump is around 70 squid ish and fit it ya self thats part o ownin a landy :) or pay me 100 squid in labour ta fit it 4 ya

as for drawings etc do a search for rave manuals and download the right one 4 ya car

it could be the bias plate has gone. don't panick its an easy cheep fix if it is. when they snap some times the bit that breaks of gets stuck against the leaver and you been towed could just have shook it loose. just take ya gaiter off and remove centre consoule then ya'll find it underneath...

you should be ok with the extra oil. but I should get your oil pump checked out cos if ya got low pressure either the pumps fooked or you have a blockage and the oil's not returning to the sump fast enough. aand finnally it could just be a knackered pressure switch in witch case change it.

firstly if ya fit the roof bar the light will bounce back off the bonnet in to the cab. second try some decent quality bulbs in ya standard lights first the r lots of legal extra bright one's on the market. and finally if you do go down the route of fitting the light bar don't forget to fit an...

what car / engine please

Sounds like u got a blockage some where or trapped air flush the cooling system and refill it with correct mix of antifreeze and quick oh and make sure you bleed it up properly this time. apart from that some one else will be along shortly to say I'm wrong and give u some more idea's

one that i've seen is to mount them direct onto the back of the body below the light cluster / above the bumper next to the rear door on the off side cos the wiring is dead easy to get at and the also then outa harms way when off road

If ya had a disco instead of a gaylander the towbar hits the feckin wall first :p

Well your right in one way but then if ya do something like what paul_c did at chesterfield pay & play site last weekend you would be wishing ya did have a snorkel. He dropped the front end of his disco into a puddle and the found out as he went in that the water came up to his windscreen...

wot about for the first time they try to make a new fred for say there first 20 posts they get a pop u that say's Have you done a feckin :search: 1st and if its complicate :nopics: don't put :nospamhere: u silly coont or else fanatic will get :violent: :hysterically_laughi...

we got a real bull bar on front of 1 of ours one o dem big steal ones and its great for pushing walls / grannies / kids outa the way !!!

which disco is it 1,2,3,4 300, 200tdi etc cos I got some in ma garage but depends which ones ya want

turning the pump round to the timing lock should be no problem. u are supposed to have a lr tool to hold the crank pully while you undo it but i just used a big pair of stilly's :D oh and of course the one other tool you have forgoten that you will need in very large supply is lots and lots...

FFS i don't belive my eyes storm's agreen with BoB what is the world comming to

they is already up m8 check out the piccy fred

it could have one if some one's fitted the mod wich aint difficult to do and its a mod I like cos been a yorkshire man its cheep :D

:hysterically_laughi

you needs a compressed air supply to run horns like that can be done but not str8 forward