better you buy one before the 20% vat starts ,or you'll find there cheaper now than on Jan 1st :)

yep your right,mine just happened to be the swivel housing,

nope ,i ran into a fecking great tree stump in the dark,no idea why i didn't see it,i know its there as its a lane ive driven before :doh:

I was only joking Buddy,it's a nice looking disco ,got it for a good price to :)

cheers for the photo's Jason,is the inverter ok under there ?,surely it must get hot ?,Ive got an inverter to power a laptop that i use as a GPS when laneing,at the moment it's strapped to the side of the passenger footwell but keeps getting kicked,where youv'e situated yours is a great idea,i...

have a look at this Nathan ,apparently there pretty good and in the uk,the guy e-mailed me sometime ago when i enquired about gps/usb etc, and he uses one of these in his Landy GlobalSat BU-353 WaterProof USB GPS Receiver (SiRF Star III) #BU353 - eXpansys UK

Eakring road is open,the notice from the police is for the tossers that stray off the correct route,there is some "washout" but you will get round it with care,last year the washout was quite bad,we came from Mansfield end and ended up using two sets of waffle boards to get down the drop, at...

Nathan,I use a laptop with Memorymap when out green laneing ,what you need is a GPS usb receiver ,like the one in the link below,if you send an eBay message to the seller, tell him your requirements ,and he'll be able to sort you out,when the unit arrives,plug it into the laptop before you...

you ought to start another list ,"work to be done" work to be done both inner wings both sills boot floor

The arm on the swivel pin housing broke ,managed to winch/drag the landy off the lane and back onto the road,then phoned RAC,who wern't that impressed. ive since fitted a standard T/R and just carry the HD one as a spare if the standard one is so bad it can't be straightened

is anybody travelling from Wrexham To Nottingham next week ?, I need an aluminium roof box that I've just bought, collecting from the Gwersyllt area,if anybody can help please sent me a pm

Jason2, have you got any photos of the extra box you made ?

it's all well and good fitting HD steering bars,but has anybody given a thought to whats going to break if you steering rods can't bend,personnally I'd rather fit a standard steering tube ,if it gets bent it can be removed and straightened reasonably enough to get you home,if the rods cant bend...

piece of wood ,two hinges,12 screws ,get on with it you lazy c**t

I have a scissor type from ,dare i say it machine mart,but it was much cheaper than those and never fails,prior to that use a large ball pein hammer,a few good blows will release the most stubbon TRE's

yes,jack it up and remove the plastic grease cup,gently rock the wheel back n forward,my guess is you'll see some movement,and you don't have to lie on your back to replace em .

it's attached to the half shaft,behind the plastic cap in the centre of the road wheel is a circlip,that holds these to the halfshaft,these wear as its not a solid joint,remove the circlip and five 17mm bolts and they come off,new ones arn't that expensive,see link below FRC5806 Drive flange...

my money's on the drive flange ,common fault on 110's

I've just bought a set of cooper st's 235/85/16 ,what pressures should i run on my 90 ? ,i've been to 40psi all round but that seems a little high ?,this is my first set of cooper's what's the general feeling about them ?,wear rate,off road,wet road handling etc. Jerry

thick chain round the pedals and up through the steering wheel secure with big padlock