Still available as far as I know..

http://www.landyzone.co.uk/lz/f9/bleeding-radiator-cooling-systems-225405.html

I'd look for an airlock first, I've not got a td4 but there should be some bleed screws around the heater pipes, let it tick over withe the header cap off etc..

I've got a q&a about the windows, is there a separate feed for up and down? As after extending my switch wires to the arm rest from center console my passenger window goes up hopelessly slow and sometimes stops, now it worked fine before I moved the switches, but when extending some wires pulled...

What engine have you got?, just curious as the mother in laws soon to be ex BMW 1series 1.6i sport drinks oil like its going out of fasion getting on for a ltr every week and a half with moderate millage, td4 are beamers ain't they..? But also I did read while looking up what the oil depression...

Depends how big your leak is :D:D

Phone zooming in abit while at a junction..

Custom driveshafts?, someone out there must make them as they are need when you slips beefy engine in a classis etc? Could it be that your rear shoes have seized up as your in and out of water?, mine siezesonceafter a deep puddle as there's nowhere for the dust to escape to..

This

Take the fuse out and see if it persists?, if anything tho its probably a bad death on the speaker module or something

Couple of mm maybe4mm should be OK but prob easier my way and just pickup x8 of these style nuts and drill n tap em

If you were accurate enough you'd be able to drill and tap the stud I should think easy enough, a man of your tallents

Could just be cos your popping it in reverse powering the system up, or something a bit lime when you pop in reverse with wipers on and the rear wipe keeps wiping the back window so you can see where your going when reversing in the rain..?

They at the fabricators who did me the nuts said not to use thread lock as I'd never get them undone

I've just picked up a cheap fl1 grill and I'm gonna have do at a project, whacking some spots into it and maybe some mesh like fl2 rrsports have, so open to cheap spots options to do so with?

So finally got around to fitting the finished article £8 ish for the nuts (8of) £20 to have them drilled and tapped (I couldn't be bothered) Fitting free :rolleyes: Painted tops of screws 9m drill bit for hole Countersunk Swapped wheel nuts Attached caps with hex head screws x2 each wheel...

I've got a £7 jobs installed to my double din stereo with screen works a treat it slots into bumper like the parking sensors do bit it has a tendency to Spon a little so some glue or a screw down one would be better, can't fault the camera quality itself tho..

No don't worry you didn't, I just re read what I'd written lol..

Sorry just realised that sounds condescending lol, I meant dropping someone who's selling wing or a wheel etc lol, not someone who actually stating breaking a freelander lol.. I've found these also as I'm looking for a part..

Cheap camera and a cheap screen would be better maybe?