Just noticed the phones kb had been playing silly buggers.. Tanga hah Obv I meant targa lol

I had it on 16" 265s but I do t think there's a limit to the size 's it rests on the top and straps around the tyre (could ratchet strap also) and straps around d the back of the tyre..

As previous add freebie will be off soon so selling the bits I've got a x2 bike rear wheel carrier that straps to the wheel in medium condition black. make me a sensible offer.. In Hyde Manchester.

So I'll be selling my hippo shortly on here at the min no idea if runner or spares repair or just the good bits lol, but do have both glass and as tic tanga roof. Panels so the glass. O es are. Up for grabs. Their in sheff at the min but can be collected from nr Manchester also. Offers?

Haha you should definitely send that to the competition for their calender haha

So I made it to the garage and he showed me what's what, on the top pully there's a plate that screw to the pully with the timing mark on it that just screws onto the pully that had come off and caused the timing to jump 3 teeth altho how it's come loose I've no idea and how it wasn't noticed...

no doubt lol, looks like its gonna be goodbye, and a navara on the way

turns out its nothing they have done with the timing, a pully thats disintegrated and made the timing jump 3 teeth - given a timming kit is another £200 possible valve piston damage etc should i just write it off?

http://www.britpart.com/calendar/ thought id share this if anyone interested..

to add, it's been a few weeks since the belts were done it was a full kit except water pump, if it's fubar I hope it's a new part failure than mechanic error I'll have a better chance of a decent payout that way.. and I'd not long since filled the tank tut..

no pics it's on the back of a recovery now, there's fuel to all 4 injectors so that side of it is fine when I loosened the cover peeked into the valve side timing cover there was a screw not much fatter than a plug socket screw that had come loose and was just sitting there on the inside of the...

manages to get the valve timing cover loose enough to look inside and there's a screw/bolt floating about I just hope it's not fubard the Pistons/valves etc hope it's not the end of the hippo..

Was on my way to work and the engine conked out as I rounded a corner, just had timing belts done (had cover off belt looks OK to injector pump), it's turning over fine but not fitting it's almost firing with care cleaner well trying anyway more than without. There's fuel in the filter and the...

Tbh I don't really want anything for it cover the post or collect if you need it..

bought some silicone spray today from the car boot I'll give that a try the more I look tho it's almost as if the glass aha grown or the doors shrunk it's an extremely tight margin length wise also I may need to cur the rubber off that folds over into the gap aswell, if I can't find a decent...

once uve removed the cubby it's straight forward for take the slack up, it's also a maintenance part to help with this, if your unsure pick up a cheap Haynes manual from eBay..

work van I meant lol bloody keyboard, maybe the alliminium has swelled slightly int the rubbers either way they look tatty I'm sure there's something that would do the job..

seems to be there now not sure what's changed was most likely me lol

Sack that it's a van lol

Not sure about the Cover but if you bought from a dealer/garage etc take it back for them to fix or at least try. But to take the slack if you have the cubby box it should come out if you remove the screws and there's a nut on a rod with the hb in off position it's will probably be finger...