Well nothing is impossible, but they do mount differently. I would be speaking to Ascroft Transmissions for advice T

Blow torch on the drum would have worked. But strip down is best as there will probably be grit in there as well Dziękują proszę T

Not sure what model you have Andy - Did you check whether you needed spigot rings or spacers before fitting the bigger wheels? T

I have had several of both. If you can afford to run and fix a TD5 then that's the one I would recommend T

Water temp sensor is on the coolant elbow on the right hand side of the cylinder head (as view from front of vehicle) where it goes into the top hose T

It will tell you whether it is wheel/tyre related or brake related T

If you remove bleed screw on tickover then expect jet of water to be about 5-6" high. Then rev it and it should hit the underside of the bonnet if waterpump is OK Below 1500rpm the bypass valve in the thermostat forces coolant through the heater matrix only, but above this (and when up to...

What? So you now have 2 :) T

I went for genuine replacements all round, but I would consider Terrafirma next time round T

Not as bad as it sounds - It was picking it up off the draglink from the leaking PAS box :) TONY

I have decided it has to be new as I am planning on keeping her for a while and need reliability for towing. Cheers for the thought though TONY

You usually have to buy the switch & relays. Only the wiring is normally there already. T

I need to get a new complete cylinder head for my Disco TD5. Best price so far is £1200.00 inc. VAT If anyone knows where I could get one for less please let me know. Cheers TONY

I did that, but every time there was an oily film on the top so I did not risk re-using it even after filtering it through a micro-fibre cloth :eek: TONY

No but the Landie has. I have changed the stat twice, new waterpump, new top hose, new heater hoses, new radiator...all in the last 10 months :eek: TONY

I blag trade price at Andrew Page's for 5 litres of pink OAT for £11.75 so not too bad, but still not cheap. Have been through about 25 litres this year so far :( TONY

What about these boys? Quality Cylinder Heads Ltd. Cornwall - Home Page TONY

It's a personal thing, and budget does play a part, but I never use non-genuine filters where liquids are concerned. Remember that your rotor filter spins at 15000 rpm. Would you trust Britpart with such a critical component? Maybe, but I won't risk it. I may consider one of their air...

Pleased for you. Mine is the HG or Cylinder head for sure. Wallet is on stand-by for a hammering!! TONY

Pre face lift are H4 bulbs. Post face lift are H7. I have the pre face list model, but with a HID kit so I can see where I am actually going :) HTH TONY