Gents the Head gasket was blown on cylinder 8.I'm going to have the head rebuilt and reinstall. There was water and oil mix. Cylinders had crispy burned oil on some of them. I've performed the timing on this already.

Does any body have any video or detailed instruction on how to change the head gaskets?

My car over heated and shut off. The next I found a radiator hose busted. I replaced it. when started the car there was white smoke.I pulled my spark plugs and found them soaked in oil. Any thoughts on why my sparks plugs has oil on them?

There was a dime that got down there that restricted the movement of the lever.

ok Thanks

Thanks

It's in park. It could be my steering column, ignition or the shift lever is not releasing the key in park. any other ideas.

My keys turns and the car starts, but the key will not come out of the ignition when car is turned off. please advise.

I appreciate you kg74. I got it now. Thank you!!!

see pics. Got it. KG the Throttle body hose connects to the fuel purge hard hose and the current hose i have connected to the throttle body hose goes on the small nipple on the MAF boot. So these pics of hose connections are wrong. I understand.

To all and kg74 here are pictures of the hose connected to the throttle body hose. Is this where it goes?correct

kg74 I will dbl check the hoses.

I installed the valve cover grommet and washers.Oil leaks gone guys!! Thank you'll for sticking with me.

see attached . The little hose comes from the rear of the engine compartment.

I think I found I will attach a picture.

Got it Gents!

No problem not offended. I admit it was rookie mistake, LOL.

This is my first time doing this and I used the new rubber Grommets that came with my rebuild kit and didn't transfer the washers. I just noticed that today. My mistake.I hope this fixes the oil leak.

attached pdf file

See picture On the left is the original grommet with a metal washer. Right is the new one I used without the was. Stupid question, could this be part of the problem?