I have had a quick look at the Terri-anne website and it has very comprehensive section on brake servo's. It is going to take me a while to go through it all. Thanks again for your help.

Thanks Rob for your advice it is appreciated. I will do as you say and check out Terri-annes expedition site and research through google. As you rightly point out, it's brakes. Got to get it right. By the way it is Petrol.

Hi Col - all the brake lines and the brake master cylinder are new and the servo has been refurbished. I didn't want to run dual lines now that I have replaced everything so if the servo isn't compatible it would be easier to fit one that is.

Hi Rob - I haven't converted the brakes to dual circuit and that was why I started having second thoughts about using the LWB servo. If there is a problem now is the time to replace it with the correct one.

Some time ago I got a brake servo and pedal assembly from a dual line LWB Landy and fitted in my SWB, which has a single line brake system. (It was refurbished before fitting). I am now starting to wonder if the servo is compatible with a single line system and whether I need to replace it...

Hi Blackburn - as you say the switch is clamped to the cable on the housing. But the housing appears to be fixed, or crimped onto the cable outer casing. There are two locating lugs on the underside of the switch which fits in the corresponding holes in the housing. I am not sure if the housing...

I have attached a brake light switch to my choke cable but it stays on when the choke is pushed in. It appears that the lump/piece attached to the cable that should activate the switch stops short. Does this mean I will have to buy another choke cable or is it possible to fix the problem ?

I will do that. Thank you.

Hi everyone I finally got round to getting the Landy out after the rain stopped and following your suggestions I have had some success. I ran a heavy duty jump lead direct from the battery to the starter motor but this didn't change anything. I took it off the starter and attached it to a...

I will do that. Thanks.

I will check the earth connection to the engine and look for damage behind the dash. I will let you know how I get on. Thanks for the quick replies.

Hi everyone this is my first post on here but I used to belong to the LROI Forum which was a huge help in the long running rebuild of my SWB 2.25 Petrol. Looking through the Forum it looks like Land Rover expertise is alive and kicking on here. I thought the electrics would be a challenge...