ok by linking the hoses together, the car shouldnt overheat? correct? I'd just wont have heat,,

hey thanks for the advice... by the way what do mean link the heatercore hoses together... to rule out matrix??

2002-landrover-Freelander hey i have a question, i just have to be sure... i've just replaced my waterpump and thermostat, and radiator... After i;ve changed the water pump the car sounded good... then i noticed that the hoses build up pressure, kinda like a block in the system, hence i...

hey i have a question, i've just replaced my waterpump and thermostat, and radiator... After i;ve changed the water pump the car sounded good... then i noticed that the hoses build up pressure, kinda like a block in the system, hence i flushed it, and still over heats about 8miins holding...

hey i just want to thank everyone one for the tips... just got the timing and water pump done.... so far so good runs great...:) , just realized the heater core just went....:( going to get that done....tips? P.s. i have the tools for the timing kit and crankshaft holder, im going to sell...

thanks buddy, im using the tools but i'll check ur guide, can u provide the link? as for my question shouldnt the sprokets move back to correct position? thanks again

Okay, thanks, I'm putting the new front belt in place .... I've noticed when I removed the oldbelt the cam shafts rotated about 3 teeth... Just to be sure I use the camshaft locking tool which should move the sprockets the right place.... Correct... I see the kv6 video shows them using the...

hey quick question, before changing the front belt, i had the crankshaft locked, where it wont move in either direction, and the tool fits on the rear small belts, the problem is the "v"notch in slightly off.. do i even have to remove the lock pin from flywheel to line up exactly.... or only...

Thanks for your help, im still stubbed.. :( Well, the thing is im using the tools, I was just wondering if theres a way i cud avoid the gears from slamming into place, say for example the main belt is changed, and im replacing the rear belts. what i'm thinking; :rolleyes: I could use the...

yes im only doing the rear belts, i'm just wondering if i need the tool to hold the front sprokets as i change the reer belts.... will the canshaft move automatically when belts removed ? (first time with this timing) lol thanks again!:)

Hey quick question, after completing the front belt, I aware that if im changing the front timing sprokets or removing the strech bolts i well have to usse this tool ,18G 1747/2 with that in mind, im not changing the strech bolts or sprokets, so my question is; well i need this tool (18G...