Hey cheers for replying just cleaned the map sensor it was covered in the black crap what's in the inlet so wiped it off and cleared the hole what's on the sensor seems to have giving a improvement going to clean the maf sensor and give car a service as not been done since I have owned the car...
Shall do is it ok to clean map and maf with brake cleaner just watched a YouTube video lol and used brake cleaner ? I've got some in garage if not will go get the other stuff
Yes but I never cleaned the map sensor tbh should I take the manifold back off and clean the map sensor and also clean the maf sensor with that spray u suggested hope it cures problem cars driving ok just feels sluggish before turbo kicks in which is also kicking in late :/
hi all having issues with a 2001 td4 freelander 2.0 feels like I've lost power until turbo kicks in like car is holdin back don't get boost till about 2k rpm ish and then car is fine driving once up to speed any help would be spot on I can add I removed the maf sensor and car runs fine just with...
Hi all just cleaned the inlet manifold on my freelander 1 td4 2.0 and feels like lost power on the low engine revs don't feel boost till later on can't think where I could have gone wrong. Starts and idles fine just feels like lost power on low range of revs don't pick up boost till about 2.5k...
Hi having a leak of coolant and found where from its where top radiator hose meets front of engine block what is this part called what gaskets do I need it's driving me crazy this leak lol how many are involved gasket wise here is a pic
Just bought it mate live on the coast like lol so you think that is where leak is looking like and what is that part called so can get gaskets and things needed :) thank you
Pic is rotated wrong way lol but if look closely can see water on edge coming out and also rusted all down front of block where been leaking and it starts there
No manual I suspect it's coming from here need to know how hard is to change gasket or rubber ring and what it's called its where the coolant enters the front of the block please advise if also agree this is where leak is more than likely coming from cheers
I suspect it's coming from here need to know how hard is to change gasket or rubber ring and what it's called its where the coolant enters the front of the block please advise if also agree this is where leak is more than likely coming from cheers