Hi folks my disco is a bit low on power not expecting super car proformance but 3rd gear up hills is rubbish. After searching through the posts on here and have gathered a selection of parts to replace and clean. Oils and fluids change +filters. Egr bypass kit. New fuel lift pump. Clean...

Nope not the switch. May be just one of things I live with .

Good idea will try that.

More questions. My electric window on the drivers side only work when my headlights are turned of. Soon as you turn any light on it won't function anybody got any ideas it's not a huge problem and I can live with it just bit weird. Cheers

Cheers found the plugs. great help as always

gone for the one with the de cat flexi pipe and middle box removed. Along with the egr removed intercooler and inlet cleaned out new lift pump and maybe i'll have a little bit move poke.

The boot floor on the disco has seen better days and although local fabricator said he can plate it there are too many areas that will soon need doing so floor is being replaced along with the side pannels around the arches some great posts on here about fitting and removal. my query is there...

Is the flexy the better buy to avoid the vibrations from the exhaust system.

Brilliant ordered got a fair pile of parts sitting here now. Nearly ready for a good dose of tlc in sept once I actually get a week off work. Cheers

Just renewed the back box on the discovery and put a straight pipe replacing the center box. Can I also get rid of the catalytic converter type thingy and if so where could I get a plain pipe from. cheers.

Cheers job for next week then.

Hi folks my vacuumed pump is leaking and I have a replacement. The big book of lies Haynes says the engine has to be at tdc for it to be changed. Is this really necessary and if so how do I easily find tdc. Cheers

I prodded a small rust patch on the rear arch near the seat belt mount. Oops shes off to be welded next week welder said hes ordering some more wire cuz he'll need it.

Cheers folks. Like the idea of fitting above the sun visor. May have a fiddle see if I can squeeze in in.

thats an idea wonder if its thin enough.

Hi folks been wondering where to put the cb in the discovery. Dont fancy screwing it to the top of the dash or gearbox tunnel. Its a midland 98.

Ah cheers not too bad then. What are these special sockets ?

Rear brakes need doing I've ordered disks and pads and a fitting kit for the pads. Not fetched my Haynes manual yet. So does the hand brake work on the rear pads or are there shoes in the disks. Also kit comes with some gaskets. Can anybody explain the fitting sequence or point me in a...

Hi folks. Im dave live in staffordshire just got myself a discovery 300tdi r reg with all the usual problems of rust so local mechaniac will be getting some work. Shes a bit of a project not going to be kitted out for off roading yet got all the mechanicals to sort first. I'm not too bad with...