The previous owner had run literally hundreds of extra wires thru the dash for cameras, GPS units, lights speakers etc etc. After spending a day trying to strip them all out as none of them worked I got frustrated and just started hacking away....

Did it myself. It used to be a utility landy with shutters

Thanks. The only bit I'm dreading is putting the dash back in..... it's a fookin he'll of a mess

Black roof

Thanks for the opinions guys. I have never attempted anything like this before and don't really fancy going any further with the strip down. Marmaduke that's pretty impressive! If mine looks half that good I'll be pleased. Best thing to treat with once repaired?? Red oxide?

I have never undertaken anything this big before, and I don't really want to take on the job of fitting a new chasis. Does this look beyond saving to you guys?? This is my chasis.

Arrrghhhhhh!! Why?

Why would both the fronts be down equally? Would it more likely be something to do with the front valve wotsit?

Lol I was considering just selling the money and it before the codes return....

Cheers guys just paid 30 quid to have the codes read and cleared. Codes present were: 116 reservoir pressure static when filling 103 too much energy for regulation needed front axle 08 high pressure exhaust valve fault 28 high pressure exhaust supply valve fault 36 compressor temp sensor fault...

Does anyone happen to live near me (tewkesbury) and have a plug in diagnostics thing to read and clear my codes??

Thanks for the reply. I've been sifting through article after article and I think I've gathered that the dashboard reset isn't enough and that I will need to get it plugged in [emoji17]

Should add, a few months back a local garage levelled it all up and it was fine for a while, never lost the error and the ride height button didn't work, but the suspension was level.... But gradually over months it has dropped back down on the front again

The front end of my l322 is lower than the back. I have just replaced the piston ring and seal in the compressor using one of the kits off eBay... (Have to say was a great walk thru from andybagpipes or whatever he's called) Anyway, all back together - have just reset the fault codes using the...

Hahahahaha im not as daft as I look

After being quoted £1500 to fix my audio system, I've just followed these steps with mine and found that the light didn't make it past the first unit which was the Nokia box. Took the box apart and it was quite obvious that water had been getting inside. Cleaned it up. Removed all the corrosion...

I have been thinking about scrapping the front seats all together and adding a bench seat instead. I have been told the Audi A8 rear seat does a good job. Has anyone else installed anything similar? Chris

Just because I ain't got a clue.... I have been offered a 150 gas cheap. But they guy says he's fished it out of his dad's garage and there's no gas bottle to check that it works properly... With out gas is there a way I can check it's a worthwhile punt?

Fair point, cheers...

Blimey ok, so a starter unit is gonna set me back in the region of £250...