1. B

    L320 injector voltage

    Thanks.have bled from that valve but when put psi reader onto it I got no reading on gauge. Only got a small trickle of fuel coming out when pressed valve with ignition on then stops. So I'm going to change in tank fuel pump.
  2. B

    Bleeping noise

    I've got a 2.7tdv6 06 when I turn ignition on I can hear pump working in tank. But after a few seconds I can hear a bleeping noise from underneath. I've unplugged fuel pump but noise still there. It only goes after about 30 seconds after turning ignition off.
  3. B

    L320 injector voltage

    Have also read low pressure fuel pump faulty can also cause this fault code to come up.
  4. B

    L320 injector voltage

    Coming up with fault code po191. Think it could be fuel pressure.
  5. B

    L320 injector voltage

    Not tried it yet but will be having ago tomorrow.
  6. B

    L320 injector voltage

    Any idea what the bleeping noise could be from underneath sounds near tank but louder on passenger side.
  7. B

    L320 injector voltage

    Will get it checked out. Bought a new battery and nearly flattened it trying to start car
  8. B

    L320 injector voltage

    Not too sure with it being an 06 model.
  9. B

    L320 injector voltage

    Yes I pulled plug of injector and cracked to check for voltage. I've got delph diagnostic to check faults.
  10. B

    L320 injector voltage

    Possible will need it checking.
  11. B

    L320 injector voltage

    Yes bled all 6 injectors. Getting fuel to all.but as trying to start I'm getting a loud bleeping noise from underneath near tank.
  12. B

    L320 injector voltage

    Just tried to start my 2.7tdv6 after putting in 2 injectors.turns over wanting to start but wont .have checked voltage on injector plug.im getting 0.74 with just ignition on but when cranking the voltage is only reading around 5 to 6 volts.have heared this should be 12v is this why car wont...
  13. B

    Starting problem

    Not sure as I'm new to these cars.when I picked it up the fuel relay was unplugged I've put it bk in and pump works fine.as quoted I'm getting fuel right up to injectors also some kind of voltage on plug but just turns over.but have a loud bleeping noise from underneath when trying to start...
  14. B

    Starting problem

    I've just replaced 2 injectors in my 2.7tdv6 rrs 06.im getting fuel to fuel rail but it will not start.ive checked voltage on injector plug and one prong is reading zero the other is reading 0.74 with the ignition on. I try to start cranks over but nothing .pump in tank all fine .
  15. B

    New member

    Hi just signed up .hope the site can help with the problems I've got on my 06 2.7tdv6 res.