ZDOMZ - That looks good and i bet it was less than half the price of those plastic ones. Well this afternoon i finally managed to tint my rear window 2nd time lucky (took nearly 3hrs though to get it looking good)

Will be brake light switch. Replaced mine other week because of orange hdc and intermittent brake lights

Cant tow a caravan when your already towing a boat. Unless umm ....

Looks good. I like the idea being its really simple just to park anywhere and get to sleep, without spending an hour setting the tent/beds/cooker up

Cleaned the rear brake lines up and covered them in grease as suggested by mot man, also did some topping up of wax oil and cleaned the cavitys out between the body and wheel arch liner. Lots of dirty built up pleased its all out and rust treated now

Bought by mistake a used winch, Thought it was 12v but picked it up late at night and couldn't see the instructions ends up being 24v Ignore listing its wrong... but picture is the same Electric power Winch, fantom, 1000kg rolling capacity, | eBay Instructions state: Single line pull...

I was in the same situation as you. Ended up in halfords Halfords diff oil ep 80/90 gl-5 Gearbox castrol syntrans 75w-90 gl-4 Ird Comma gear oil sx75w-90 gl-5 I'm now at 6k more and its a lot quieter than before. Best of all I got them all from the same place. Easy

Ignition switch, small lead connecting to the starter all dirty, earth points dirty Next time it happens wiggle the wires going to the starter motor then jump back into vehicle and try again or leave it till auto elecy comes out

Passed mot today yey :banana:

It also says min power 12v @ 55amp so thought jump leads at 160amp would be fine

Bought one of those cheap winches. (In a plastic housing type) Planning to use it for multiple things not just on the car. I need to find some longer cables to reach the battery (planning on connecting it up to battery each time i use it) thinking around 4mtr black and red so no confusion...

Was just thinking the same. How bad can the quality be?

Bought it a new brake light switch. (Amazing everyone can now see I'm slowing down ) Bought one of those cheapy 12v winch for recovery

Replaced the power steering fluid (looked black and old) went to collect a winch with it and on the way back noticed I had no brake lights I.e another new switch needed

I removed my lid and it still works fine.

Haha nice to know I'm not the only one with scratched side windows. I can live with them Anyone tried a glass polishing machine

14psi doesn't sound right. Isn't the cap supposed to let air escape at 11.6psi?

If it runs alright. Black paint over the hdc light? Haha Good luck sorting your problem out. Best not sell it after all this trouble

Have you also set 12mm of play in the throttle cable?

Prop shaft uj's that's a point. Should I grease those up? Bit hard getting it into them though. Maybe I should use spray grease? I always gt85 the door hinges and most other parts regularly