Cool :)

:)

Nothing really out of the ordinary really, works fine though

To be honest I can't for the life of me remember, one thing though I don't have it in compatibility mode. I will try to go back through it to see what I did

Running ok on my laptop with win 11, I had to play with it a tad but got there in the end

Just on the off-chance I was wondering if anyone had a complete rear upper tailgate in or around the Poole area with no rust. Mine, as seems to be the norm, has rusted along the lower seam and as I have to also do other repairs to it and re-spray it I thought it would be faster to get another. I...

Cheers

Cheers, that connector burnt out a couple of years ago and I soldered it the same as the ones on the LH side, the only one I am not sure of is the one beside it.

Many thanks Pete, Is there anywhere that gives the description of each wire?

Does anyone know the pinout/description of the 2 connectors beside the inertia switch in the RH front kick panel (RH Drive). I did have a picture way back when of the colour codes and the connector. I have soldered the connectors in the LH kick panel a few years back and want to do the same. I...

An absolute star, many thanks keith

Many thanks

I have a couple of suspect driver packs kicking about, what needs to be soldered Keith?

I have done this to 2 pairs of mirrors, it is a faff but can be done. I haven't needed to remove the star clip but when undoing the adjustment motor where the mirror clips in there is a slot. I have clipped the end off of this which allows it to pass through the body otherwise you will be there...

Did you check/re-seal the valance screw clips, I chased a leak for years and then sealed these and many years have passed since and still dry.

Fortunately when I did mine a couple of years ago I bought spares as stock was low back then. Try James Coleman on the Range Rover P38 UK facebook site, he has pretty well everything

+111111111 :)

From what I remember when it first happened to me someone had said that the 50% latch movement was to prevent the door from opening prematurely. It did require the latch to be fully closed again to reset itself.