I had a fault with the one I had, when I swapped sides it was fine. I did however test it with a multimeter and it seemed ok in both positions

I am assuming you have cleaned up and checked the plug terminals and the large connector on the EAS ECU? Sounds like it could be a connection issue

Fully agree Keith, I thing everything is being made there, but as mentioned, it all depends on the garden shed it is coming from and the sledge hammer being used. The quality of the Chinese and the one "marked" Dunlop were worlds apart. The Chinese one gave a fault when I put it on the right...

Definitely very different quality Kurt, very smooth to operate and the shaft is secure. The sensor itself is a much better build quality so if it comes from China it comes from a much better quality garden shed ;)

As I mentioned I made sure the rod was squared to the shaft and poured metal epoxy in the gap, sound as a pound now. I am not sure if the looseness would cause an issue but I thought I would make sure. If you do it make sure to make a shield to fit between the sensor body and the link to stop...

It will be one of the Chinese ones then, they are waiting for the Dunlop ones. The Chinese one I had was wobbly on the shaft. I poured epoxy metal to tighten it up, seems sound now. The Dunlop one from Paddocks is a lot smoother and the shaft is tight. I guess you pays yer money and takes your...

One of the after market Chinese ones? I had to swap sides with my replacement one, the other replacement I managed to get a Dunlop one from Paddock’s, seem to be calibrating ok so far

I can hear the swear words from here

Just cheap plastic ones I picked up somewhere, I just chuck them when they no longer work

They charge too much, I order the 500ml cans and use a pump aerosol

I would check their stock first, the one here in Poole sometimes runs out, hence getting my supply from Amazon :)

Restocked my supply from Amazon last week, Eurocarparts also stock it, have used it for years and it is the tops

That’s what worries me

Thanks mate, I checked the connectors and they seem not too bad to be fair, I was wondering if there were any connectors between the sensors and the ECU. I can’t see any on the wiring diagram

Hi Kurt, I have been fighting an intermittent fault for a very long time, have replaced with new rear sensors (fault always seems to be from the rear) I have cleaned all connectors and removed the white one behind the kick panel. When I have tested continuity from the rear all seems ok. Is it a...

Ive got 2 more of the metal lumps if you want them ;) It's a spacer for the lock assy, haven't had mine on for years, too much of a faf to put them back. I have a latch to go back to him in exchange for a refurb one I bought, he has told me to hang on to it until he returns. As for Marty's...

Maybe these :)

I've got some platform shoes you can have ;)

They are quality oak