1. Bone9

    Hi guy, V8 Disco 2 buying advise...

    Cheers buddy, that's excatly what I did . Was a temp sensor and now works great!
  2. Bone9

    Hi guy, V8 Disco 2 buying advise...

    Already bought it mate! Few weeks back! V8.
  3. Bone9

    Hi guy, V8 Disco 2 buying advise...

    It will be very well looked after don't worry.
  4. Bone9

    Hi guy, V8 Disco 2 buying advise...

    Why? I love it!
  5. Bone9

    Hi guy, V8 Disco 2 buying advise...

    No worries. That's for the 80mm pulley as listed above.
  6. Bone9

    Hi guy, V8 Disco 2 buying advise...

    Having a hard time finding the small 70mm pulley.
  7. Bone9

    Hi guy, V8 Disco 2 buying advise...

    This is it isn't it? https://www.ebay.co.uk/itm/LAND-ROVER-DISCOVERY-2-PETROL-4-0-V8-ORIGINAL-DAYCO-BELT-TENSIONER-ERR6439G-/280780862948?_trksid=p2349624.m46890.l49292
  8. Bone9

    Hi guy, V8 Disco 2 buying advise...

    Awesome! Cheers mate.
  9. Bone9

    Hi guy, V8 Disco 2 buying advise...

    Sorted that straight away mate. Yes it was the temp sensor
  10. Bone9

    Hi guy, V8 Disco 2 buying advise...

    Hi matey. I've bought it and believe he had one pulley fail so just want to know what the other ones are so I can replace them also. Cheers
  11. Bone9

    Head gasket exhaust blow!

    It's the drivers side that is blowing so will only need to remove that manifold to get a better look at it all. Mines a 2003 4.0 V8 auto
  12. Bone9

    Head gasket exhaust blow!

    Yes I first thought it was the manifold leaking from the sound of it so bought new gaskets, bolts etc and y pipe gaskets to fit next Saturday. But during the week the sound completely changed to a train like noise on idle. I haven't taken it past 1500rpm but the noise changes to a much harsher...
  13. Bone9

    Head gasket exhaust blow!

    Hi guys, I thought my disco had an exhaust manifold leak but now I suspect that the head gasket has blown out at the exhaust side! What's the chance of this happening? It sounds like a train at idle, chuff, chuff, chuff. Will a head gasket change be all it needs or is it likely to need other...
  14. Bone9

    Exhaust manifold gasket, bolts/studs suggestions...

    Hi guys I need to change the manifold gasket on my 2004 4.0 V8 discovery. Wondering what the best type of gasket (multilayer steel or the compressed material type) would be? Also I'd like to replace all the bolts with upgraded studs/nuts or bolts. Any reccomendations please? Thanks. Tobias.
  15. Bone9

    Loud ticking noise

    Ok, cheers mate.
  16. Bone9

    Loud ticking noise

    What issues did you have?
  17. Bone9

    Other what have u done on ur disco today

    Fitted a new rear wiper motor, changed my lpg filters and temp sensor, cleaned out the LPG map sensor and got it running on gas again!
  18. Bone9

    Hi guy, V8 Disco 2 buying advise...

    Great, thank you
  19. Bone9

    Hi guy, V8 Disco 2 buying advise...

    Hi guys, I'm going to look at hopefully my first Landy tomorrow, a Discovery 2003 ES V8! It has been LPG converted and up for £3950. Its got full service history and done 133k miles. There is a slight issue with the LPG where it switches over to gas too quickly before it warms up. Is that a...
  20. Bone9

    Bankz's 110 Double Cab

    Looks awesome mate!