screwing sounds good, any particular type? I have some turbo gold wood screws? ;)

Couple piccys for you, it was the end plug so was difficult to get a good snap. Hopefully you can sort of see though,

Replaced my glow plugs, first three went fine, last one snapped on me :( Ive bypassed it for now, anyone know of a good way to get them out without taking the dam head off? Also, nipping down to the garage later so a friend can slap some gasket sealant on my nearside rear hub as its leaking...

Used it to refresh the coal stocks for the ray burn. Another 200kg :) wheel bearing gasket is leaking so need to take it off, clean everything up and replace with some gasket glue :)

Replaced my rear bearing. Got some more copper grease and cv grease. Going to grease my ujs up and replace rear diff seal and hand break expended and shoes :) couple more jobs ticked off :)

It's just passed thankfully. So I have some time to get it sorted :) surprised it passed anyway it's so bloody useless.

Got fed up with my hand break seizing up whilst driving, and not doing anything when I try to apply it when parked. So I took the whole lot off until I can replace all the worn out bits. Which is basically the whole landy haha.

I shall do so thanks :)

Got a wobble in my steering wheel when i go over 40-45mph and it continuous to get worse until until you get to 65-70mph where everything is doing this weird gentle wobble. I am guessing its something wrong with my steering? or maybe I have knocked a balance of a wheel or something? Any ideas?

Got lots to do to mine! Bearing at back needs sorting. Outrigger needs replacing (I have it, just need someone with a welder). Battery box needs replacing (like the look of those aluminium riveted jobs) chassis needs painting. Got a tub of Hammerite. Just need a jet wash and a sanding disc to...

Wicked thank you :)

Ooo yea? How ya do that? :D

Took a quick look around at what might be causing my phantom knock. Gave everything a wiggle and tug (and kick). Found some play in my rear near side wheel. And just with my hands I can make it "knock" a bit. So guessing that's a wheel bearing gone?

No. With normal day to day driving :)

Right. Got a problem. I think. Lots of play on the front prop but this is while the hand break is on so can't compare with the rear prop. (I shall compare when it's light tomz!). Also getting a one of thud or knock as I go into corners are put in gear and out foot down. Or come of the...

I'm not that much of a fool ;) the pads were longer then the callipers :( all sorted now though. Ran out if time before the re test so just got a tyre shop to source the parts. They had them in an hour which I could never have done

Took my hand break drum off and cleaned it up with sand paper and break cleaning stuff. Did the same on the shoes. Turns out its still **** and won't hold the landy in place :/ Might just replace the whole lot. Have to see if it goes through the mot

Ahh cheers! But that says up to 1986?

Ones I got were too wide but had the right pin fittings. Bit confused

Fitted new polybushes on a frame. Pig of a job, one bolt came out easy, the other had rusted to the metal sleeve in the bush. Spam endlessly. Tried everything to get it off. In the end I took and angle grinder to the bolt, ate away bit by bit. Took for ever. Horrid job, loads of **** on me...