What?!

Hello there. I have been searching long and hard and finally found a set of 16x8 et +8 modulars. Most being et25 or an obscene et-35! The +8 will give me a wider track by 49mm a side wich will suit my 50mm flexi arches. before I take the plunge does anyone have a pair fitted and have a pic...

:Do_O

Make sure you stick a pic up with the wheels and arches. 7.2 inches wider track and only 4inches more arch!

A healthy td5 with a decat and egr blank is not at all gutless

What offset modulars have you bought? The most "aggressive offset" I can find for a D2 et+25 that isnt alot and then et-35 that will stick out 93mm a side more than standard wich is insane!

That makes sense! Thanks, the headlights threw me! I'd love the dish in the wheel but its just not possible without MASSIVE arches. Shame theres no middle ground offset for a d2 available!

Hi mate I'm hoping you can help me. I have a d2 td5 and im about to get a set of modular steels. Looking at 16x8 et -35 to get the big dish. I see you have these in an old thread and yours is a disco 2 like mine? The old link to tyres direct no longer works but the link it mentions disco 1? Can...

They look good! You'll have to keep on top of cleaning them now!

I'm not really after improving the performance as it goes well as it is, I've got a decat egr removal and remap. I wanted to side exit because my tail pipe is looking abit scabby and I like the look of the side exit. Also the last time I took my caravan somewhere there was a long steep pull and...

From what your saying there isnt much point in me keeping the centre box, I will try it first tho as it's only welding a few 45s on the end to get rid of the back box. Thanks

Thanks but I'm hoping to retain the centre box to keep it at a minimum

I really enjoyed that. A good bit of messing about/engineering!

Hi guys just a quick one. Is anyone running a de cat, keeping the centre box and using a side exit so it only retains the centre box. What is this like noise wise? Loud? Really loud? Droning? Great for an off roader but not a daily driver? Any input would be great thanks

I'm not 100% sure to be honest, if it was all in and running I'd maintain and keep it but since it's been off for a long as I know of chances are it wont be in good nick, the relay has been pulled so the compressor wont have turned for a long time! I'm not going to restore it and inherit the...

Unfortunately the airbags were removed when I got her

Hi does anyone here run +40mm heavy duty springs rear and medium on the front? I have a 03 td5 and do abit of towing, smallish trailer and a caravan so was thinking going HD on the rear would improve the drive when towing but im a wondering if its going to be too bouncy under normal driving...

I've just had emptied mine out yesterday! There was 3x 32gram4 1x 42gramBB. White tolblerone wrappers. Uk birds Pocket book Monocular Fuel receipt 2x Turkish car was airfreshners unopened A screwdriver Broken sunroof winder arm. Hope that helps!!

https://www.superforma.co.uk/wheel-spacers/slip-on-spacers/5x120-slip-on-wheel-spacer-pair-cb-70-1-m14x1-5-nut.html These guys make a billet hubcentric spacer in 15mm and jsg4x4 do 15mm extended hub bolts. I cannot see any issues with this apart from marginal increase in bearing load but must...

Yea I agree with what your saying but i see there are alot for sale for the disco3/4 at 15-20mm hense the question. I would be happier with replacing the studs in the hub and just sandwiching the spacers if I could get them