Two photos of the rear forward facing seats. As u can see the brackets have a stud and two holes for mounting. The problem is, if I was to drill a hole in the floor and just use the stud, it will be unstable.when the seat rotates up. Like I said above I am designing brackets for this so I...

These are the feet to the middle row seats. Making brackets so when they sit up right the bottoms won't hit the wheel wells. Pushing them forward about 10mil and 1 mil up. The rear bracket that they sit on ha to also go up 10mil.

This is the lower bracket. The other two are actually attached to the seat.

Got to it first i See. :eek:

I will take some pics tomorrow and post them for everyone to see. The brackets on the seats are different. Also the Tub for a 1987 Def 110 is different from a 2012. 2012 rear tubs have two different design modifications made. One the incline in front of the tires is not as drastic, mine...

Hi all, Everyone might think I'm daft, But i am installing 2012 seats in a 1987 defender 110. I know there are some adjustments to do this and you will lose some leg room but the question is: Has anyone attempted or completed something like this? If someone has could you please...

Hi, gearobx and transfer box, what ratio and type? Nick

I have a 200TDI with a LT77 trans and 230 transmission. I have put a 2 inch lift with some 275 tires on the truck. Do I, or would I need to replace the transfer box to a lower or higher gear ratio? I would like to cruse highway around 70, if at all possible. :confused:

One more pic

So,e of the work that has been getting done. Slowly

I might just do that, I have been rebuilding a 110 from about a year ago. Just need to hook up the rest of the engine and install the doors. I thought putting doors together would be easy, as if. Let me know if next week would work for you. Taking a week of leave from work, so i have some time.

There should be an exhaust mount that holds the down pipe that starts at the manifold to the straight away underneath the truck. Unless my exhaust down pipe is bent, but i don't think so.

What year? and engine?

Ill take the heater matrix.

Looking for the exhaust mounts, that go to the side of the engine block and the down pipe, if willing to part with? Nick

I have a 200TDI wiring loom and the ignition lines were cut, any one know the correct lines and if there should be four or five wires that hook up to it?

Pm'd you.

Does the 200tdi loom have the old style fuses or the newer ones? Also how much you looking for them?

Still got those Pis and is it availible?

How much you looking for the Front sals?