1. benthomas

    Target heights incorrect

    As far as I am aware I have the exact values I need from using the heights facility on easunlock, lower or raise the car in small increments until you achieve your required height, then record the values from each sensor? I spent 90 mins on perfectly level ground and got the heights to within...
  2. benthomas

    Target heights incorrect

    I've searched the phrase above but the results I found were quite inconclusive and don't really answer my question. Up and running again thanks to a compressor refurb and help from Nikthegeek to clear codes. As soon as we got the fault cleared and eas took over I noticed it went higher in std...
  3. benthomas

    Eas gone nuts

    Well thats the best £4.36 ive spent this year! £1.09 each for the 6mm push fit straight connectors and a trip to the tyre guy next door.....Sorted. Just been out and pumped all 4 bags up, i can now ride to my nanocom guy to get the fault cleared in comfort :) Pump's refurbed and fitted, i'll...
  4. benthomas

    Eas gone nuts

    I'm not looking for a cure, just a temporary way to lift it off its arse. The compressor will hopefully be repaired today and codes cleared tonight but if for some reason the parts dont turm up i cant do another 150 miles on the bump stops till tomorrow night.
  5. benthomas

    Eas gone nuts

    Thank you mgmayo, Very helpful advice, thats what i was looking for as a real temporarry measure to get me off the bump stops. If things don't go as planned today thats what i'll be doing tonight. Question, if there is no leak in the system and i pump up each bag it should stay up, if i have s...
  6. benthomas

    Eas gone nuts

    Right now we're getting somewhere, just been out to unplug the violet coded pipe from the valve block to try and get some air in the system and air blasted out and kept coming, so it looks like the tank is full of air. With the engine running the air pump is not running but I know the pump does...
  7. benthomas

    Eas gone nuts

    Ok that makes sense Nik, so if I get the pump replaced or refurbed could I call on you at work in Warrington to get the fault mode cleared then see what happens?
  8. benthomas

    Eas gone nuts

    Right spent the last 2 hours trying to make sense of what's going on and all the time I'm thinking coil springs sound like a really good shout when you consider just how many components there are to fail on the EAS and the cost of each item to replace. The pump is knackered, it pumps but is very...
  9. benthomas

    Eas gone nuts

    Returned from a weeks holiday and the RR started first time and everything ok, next morning got in it to go to work and the suspension took forever to rise from access height, it eventually did and was then fine on the 50 mile trip to work and a trip to the chippy at luncg time. Got in it to go...
  10. benthomas

    Oh no the list is growing

    Yeah point taken about the power to weight ratio, to be fair if I plant my foot to the floor it does pick its tail up. I just feel it stays in gears too long, like it could shift up but doesn't want to. Does anyone have experience of the issue with it not going into park or 1st? it's as if the...
  11. benthomas

    Oh no the list is growing

    Thanks for identifying the disconnected pipes Wammers, one less thing to scratch my head over. I may have been expecting a bit more get up and go than is really available from a DSE but this is definitely not stuck in Sports mode, the sports mode does offer that little more acceleration but to...
  12. benthomas

    Oh no the list is growing

    Well after my positive start with the replacement of the air bags and a bloody good clean up the new P38 was looking good, when I bought the car I instantly noticed that it was very slow to change up the gears, sorry should have said its an auto, any way I thought it would just be the gearbox...
  13. benthomas

    Hi, Newbie needing P38 advice

    Well it's 3 days on from fitting the 4 New air bags and all is looking good. I have noticed it takes some time to lift from standard height to max height so I'm thinking the compressor needs a refurb, going to order the refurb kit tonight.
  14. benthomas

    Hi, Newbie needing P38 advice

    Well guys, that went really well. £187 plus vat with free delivery for the full set of air bags from Island 4x4 and 3 hours trouble free work and the air bags are done. The system took a while to sort itself out when I had finished, the fronts weren't raising to top lift but after 5 or 6...
  15. benthomas

    Hi, Newbie needing P38 advice

    Thanks for all of your quick and informative replies guys. I will definately not change to springs on your advice and will get the air bags and replace myself. How big a job is it? an hour a corner? I'm a savvy spanner monkey but do i need any special tools?
  16. benthomas

    Hi, Newbie needing P38 advice

    Thanks for all of your quick and informative replies guys. I will definately not change to springs on your advice and will get the air bags and replace myself. How big a job is it? an hour a corner? I'm a savvy spanner monkey but do i need any special tools?
  17. benthomas

    Hi, Newbie needing P38 advice

    Hi there all, I've been looking for a economical and reliable mode of transport and just bought my first range rover, yes I do have a sense of humour! Sorry to ask a question you are probably sick of answering but I need some quick advice. It's suspension Drops evenly on all four corners...