1. andyt109

    Side exit exhausts?

    i personally self made mine, paddocks sell a 'sports exhaust' which is a rear section and a pipe instead of a middle silencer, 35 quid not bad. i used a decat pipe too, 20 quid. i chopped off the rear silencer before the final bend, and used a 45 degree angle section of pipe cut from the old...
  2. andyt109

    close fit winch bumper And Air con?! :eek:

    Hi, i was looking online and have seen some very smart looking close fit winch bumpers for discovery, where the winch sits inside the grill and allsorts. I spoke to a company who said that you cant have a close fit and air con. SO... does anyone know of any company that makes such a...
  3. andyt109

    juddering on acceleration after 25mph... :S

    yeah changed the whole prop as had a spare one. yeah defo back right way round all greased up. rear one is good, all greased up and no play. i shall give tightening the wheel bearing a go tommorrow. theres a slight occasion click metal to metal screech occasionally on pull away but not...
  4. andyt109

    juddering on acceleration after 25mph... :S

    so i took of the worn prop, and took it for a test drive with rear prop only on (diff lock in) and there was no judddering whatsoever. fitted new prop and now juddering is back same as before. checked wheel bearing on drivers side and there is a bit of play. would u say this alone could be...
  5. andyt109

    juddering on acceleration after 25mph... :S

    hi all, my 300tdi 1995 es disco has developed a judder which is consistent to low and high range after 25mph, makes no difference if diff lock is in or out, but on overrun or clutch depressed or in neutral there is no judder. when pulling away there is the occasional clunk/click from the...
  6. andyt109

    coding keyfobs from scratch...

    Thanks! worked a treat.
  7. andyt109

    coding keyfobs from scratch...

    can this be done? 1995 300tdi es, standard imobiliser/alarm unit (single unit for central locking and alarm) have a keyfob from the last unit which got wet but no keyfobs from new unit. how can i code a couple of random single button fobs in? both units are single button units. thanks
  8. andyt109

    drivetrain grinding noise?! :O

    hi all. i now have a grinding noise coming from my drivetrain, not excessive but noticeable when being driven at any speed. more of a clunky sound a slow speeed but more of a grindy one at higher speed. noise came on, so thought might be stone in disc, checked and there was a few but didnt...
  9. andyt109

    My disco is temperamentalÂ…figure this one out!

    depending on how long you had it... could have just had a blockage in the high pressure fuel system which has now cleared after you gave it a good booting... but the idle control screw was set to compensate for said blockage in the past, but now revs higher because of higher rate of flow. just...
  10. andyt109

    300tdi wiring diagram for c-locking

    Hi does anyone have the wiring diagrams for a disco 300tdi '95 es in particuar the central locking diagrams... if you do i would appreciate a copy. Thanks
  11. andyt109

    300tdi loosing water! oh dear

    didnt even know that came apart like that/the gasket even existed, cheers! good write up there mate!
  12. andyt109

    replacing rear shock absorber bushes

    yes if its a 2 piece rubber bush. might be bit more tricky if its 1 piece, might have to take it off to fiddle about
  13. andyt109

    Are all Discos seven seaters?

    i know the ES models are 7 seats, i have seen models below that which also have the 2 dickie seats in the back tho, but i couldnt say for sure thats just my 2p
  14. andyt109

    300tdi loosing water! oh dear

    this P gasket, is it the water pump gasket itself? or is it something else? when i did the water pump i fitted a new paper gasket and thin layer of gasket compound around one of the bolts which sheared off. the bolt holds the water pump in, apparently its the long one which always breaks. ill...
  15. andyt109

    300tdi loosing water! oh dear

    Hi all my 95 300tdi es is loosing water recently. headgasket done only a few weeks ago, water pump also done so no apparent leaks under bonnet. however while driving the car fills up with condensation... which leads me to thinking that maybe the heater matrix is leaking? the confusing thing...
  16. andyt109

    side trim and steps

    plastic off, steps off, treesliders on, look the part n u can use em at steps too
  17. andyt109

    Hertfordshire Lanes?????

    anyone got a 300tdi starter motor local to north london?
  18. andyt109

    heater blower motor, easy to get to?

    Take the cardboard cover off which is at the bottom of the dash in the n/s footwell, motor is right there, plug at the bottom. 3 screws/bolts to undo and it'll drop out. simples. should take about 5 mins to have it out.
  19. andyt109

    Stiff gear change 300tdi

    i had a similar problem, i had nice gearchange then submerged the car in water.... now its slightly stiffer, so some fresh MTF it is then! unless theres something else to look out for when uve got a gearbox wet?
  20. andyt109

    heater blower motor, easy to get to?

    Cheers guys, sorted it now, breezy :cool: