Hi the diesel tag / label under the filler cap on a 300tdi 1995 appears to be held on with two screws. does anyone know if these are in captive nuts or do I need to reach behind the wing to get a spanner on a nut? Thanks

you can get it for smart watches too - to use an example the centre of Nelson's Column is woven.track.drank

Thanks I will have a look. I actually think the clock is working and holds time for a while then loses time.

Hi 1995 reg 1996 MY defender 90 300tdi CSW recently replaced my wiper boxes (thanks for all your help on that task) so had most of dash out and instrument binnacle. All was working before but now click only runs with ignition on and heated rear screen dash light no longer illuminates. So...

Yes sorry M Sept 94 model year 95

So I have a Sept 94 M reg 90 300tdi vin number suggests it’s a 96 model year. Which is about right for a September 95 reg. It has a MA948*** vin number. sometimes when searching for parts it definitely falls in one group. But then looking at a Bearmach transmission tunnel mat for a R380...

Thsnjs thanks. Yes will do earth next. After all I don’t actually need speed when dry. Although they definitely get better the longer engine is running. Re hoses thanks. May cut up and old Henry hose to give me more tolerance.

Quick question about the demister hoses. Mine appear to be similar to hoover hose but if they were an inch longer might fit on the demister and in the rubber skirt below. Has anyone swapped these for aluminium ducting or actually cut up a hoover hose to make longer?

yeah that's my thinking - when I bought it the LH wiper spindle turret was loose and I wonder if that stressed the motor. Once I took that off and ran for a few weeks without it it was fine.... 25 years I guess its just tired :0)

nothing it was chopped off the picture was as it came out of defender

well lubing and lubing the shaft that the metal end of the drive goes up and down got rid of the squeal - but unless super wet they a glacial in speed.

so finally took dash binnacle out as part of fixing wipers.... and this was inside - so still a headphone jack in my mind

Thank you.

Thanks. I assuming can be cured by lubing. Which bit is the bottom bush? Thanks

p.s. the wiper boxes were not britpart ones and it didn't make the noise or have slow running before.

Defender 90 300tdi 1995MY Hi when I got my defender one of the wiper spindles was broken. So last weekend swapped both wiper boxes, new wiper arms and blades too. New cable that goes from the motor to drive the wipers. Greased up the cable Put is back together and the wiper worked. (luckily I...

Not sure will check tomorrow.

okay I have updated my profile thanks for the heads up its a 1995MY 300tdi Defender 90 (county). I seem to remember when I swapped the lights to LEDs the rear indicator on passenger side had crimped connectors not the official one. I wonder if perhaps the original connector had an issue with it.

Okay by which point I’ll have had to have gone underneath anyway.

Well there was a picture when I posted. I’ll try again. So to be super clear as some of the description was missing too. these plugs can be seen through the gap between top of rear cross member and bottom of rear door. one is very similar to the sort of plug seen on the loom where a side...