When I changed my fan belt one year ago, I found the new one (Dayco A/C + ACE PQS101510) was longer than the old one, so it was easy to undo it. I asked the seller, they told me they had no problem with hundreds of buyers. Sometimes I can hear squeak noise on start or stop, but no problem in...

Thank you for your info again! I lowerd down the front headlining of driver side and checked leak. When I pulled out drain tube, the plastic drain pipe has been snaped off at half. I see ebay has sunroof tray...

Thanks Andy. It seems my guest is correct after I parked my car with driver side high, no leak happened. I pulled down a bit headlining, those 14 screws are accessible.

I lowered front headliner, poured some water in sunroof tray and felt water from underneath of plastic drain of driver side. I have following questions. 1. Is it possible to fix leak from plastic using silicone in-situ? 2. If not, is it possible to remove sunroof by lowering down front...

Recently I got rain leak at the inside top corner of driver side of my D2. By pouring water to the sunroof tray, I made sure drain tubes are clear and also sealed between roof and rail nearby using RTV. I found there is a big gap at the junction between the gutter and the top corner of the...

I decide to change it myself. I am not sure what size of spanner to hold flange bolts, undo flange nuts using 9/16" socket? I tried a 13" spanner, it is slightly smaller

caused by friction between flange and metal washer/shield?

I called a LR specialist garage for leak from output seal of my D2 t-box. He told me the fault flange could cause leak too. I think if seal is ok, the flange is unlikely to get oil leaking unless it is cracked. Has anyone had flange leaking? or any idea?

I got oil leak from the input shaft of transfer box, I degreased and dried the t-box, I found yellow drips from the seam between g-box and t-box after a while of drive and didn't see any pink. I drove to a garage for quote, they told me it is also leaking at g-box output which drives t-box. They...

I degreased the t-box today and drawed a line across i-shaft and the case. After 20 miles drive, it seems the i-shaft has no drift and is dry under it. Possibly the i-shaft hole is still in good condition, but I saw oil out from a small seam btw the g-box and the t-box. It is likely the input...

I have 2004 disco. td5. How can I check its transfer box i-shaft hole has been oval from outside? I guess i-shaft is fixed with external lock nut, if it it is not loose, can I say it is not oval yet.

If valve is not tightened, I wonder it could become loose later. I found my tyres have more or less air leaking after three months or longer. Maybe loose two turns explains it.

I bought a valve tool from halfords and got a valve from other tyre for time being. After I screwed up tightly and inflated, it had no air hissing, I checked other three tyres, there were about 2 turns to tighten up. Should I tighten or leave one or two turns?

I just tried a thin clipper, the hissing became weak, it seems the valve is loose.

Thanks Stanleysteamer, do you mean a valve remover can do this job? What do you mean by tyre place?

After I inflated tyres for my landy at a petrol station, I was hearing air hissing from one of the tyres, I could feel air pressure from its valve, anyway I drove home. Is it possible to fix it simply by myself or have tyre shop to check it, Thanks!

I didn't find fault code document. But now I found someone post it in Nanocom forum, 23-5 under boost has occurred on this trip (current)

There is a number 23-5 at the beginning. It is not like fault code.

When I did live ABS input monitoring using Nanocom. Nanocom was plugged in OBD socket first, then started engine. three amigos and some lights were on and stayed (like HDC, SLS and green HDC lights). I thought they should be gone as usually as soon as engine starts to run.

Thanks! I want to know my live ABS input monitoring is correct with some dashboard lights on, otherwise my landy could be damaged.